<![CDATA[
<BODY>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Automatic Bagging Line</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3820</TD><TD CLASS='tablecell' VALIGN='top'>Complete bagging line comprising a twin head valve packer
with automatic closing and sealing followed by a palletiser and automatic stretch hooder. This is offered
as a complete plant but may be split at the discretion of the owner. Drawings, wiring diagrams and
manuals will be available to the buyer. Photographs are available. Machine details are :-
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 60000</TD></TR>
</TABLE><BR><BR>
<A NAME='packaging'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Packaging - Pallet Wrappers</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3823</TD><TD CLASS='tablecell' VALIGN='top'>BTH type BTH-RHM-040 stretch hooder and pallet wrapper.
The hooder automatically measures each pallet as it enters and makes an appropriately sized hood which it
then applies to the filled pallet. There are two sets of stretch spoons, stainless steel and plastic which
are selected on the basis of the film type. The machine works with an 800 mm diameter x 1080 mm wide film
roll weighing up to 800 kg. It forms a 310 mm corner gusset. The palletiser was built in 2000 and will
operate at up to 40 pallets per hour.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3822</TD><TD CLASS='tablecell' VALIGN='top'>BTH type BTH-PCD-900 palletiser with bag infeed conveyor,
bag flattener, empty pallet magazine, pallet bottom sheet dispenser and exit roller track. The machine
will operate with 1200 mm x 1000 mm and 1200 mm x 800 mm pallets. Stack height is 1500 mm including pallet
and it can take up to 2000 kg per pallet. The palletiser was built in 2000 and is rated at up to 900 bags
per hour.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='weighers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Weighers - Bag Weigher</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3821</TD><TD CLASS='tablecell' VALIGN='top'>Korsnas-Bates model VENPAK V140 twin weighers with valve
packing heads 140 mm and 120 mm. The bagger has empty bag storage, robotic bag placer and bag closer. The
unit has safety fencing and touch screen controls. It was built in 2001 and will operate at up to 1000
bags per hour but the palletiser limits the system to around 900 bags per hour.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Bagging Line 6</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4026</TD><TD CLASS='tablecell' VALIGN='top'>Bagging line built about 2002 comprising a Richard Simon
belt fed automatic electronic bag weigher with underhopper and electro pneumatic birds beak bag holder.
The weigher has a Computapak 2 control system and a weighment range of 5 - 25kg. The weigher is fed by a
Walthambury bag placer with bag magazine which will work with plastic or paper bags. The filled bags are
sent to a Walthambury bag closing and stitching line model WJM 877E. The stitcher is on an adjustable
support with a 200 mm slatted plastic conveyor about 4.0 metres long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 16500</TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Breakfast Cereal Plant</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4045</TD><TD CLASS='tablecell' VALIGN='top'>Modern breakfast cereal production plant which has done
only 2200 hours work. The plant comprises an extruding line with ribbon blender, a flaking line, pneumatic
transfer equipment, a single pass and a double pass oven both propane fired but can use natural gas, a
coater and three packaging machines with metal detection. There is also a sugar frost preparation plant
and a vitamin/mineral preparation plant. The principle suppliers are American Extrusion International,
Woodman and Ishida. The plant operates as a single line as some machines are required for both extrusions
and flakes. The flaking line will produce corn flakes and frosted flakes at up to 200 kg/hr. The extrusion
line will produce a range ofdifferent products and different shapes including Rice Crispy, Choco Rice
Crispy, Fruit Rice Crispy, Mini Rice, Fruit Mini Rice, Fruit Rings, Fruit Balls, Choco Balls and Oat
Rings. Average output is around 250 kg/hr. The ancilliary equipment is big enough to accept a second
extruder to double the extruding capability. Electricity supply required is 3 phase 60 Hz 440 V. This
plant is not in the UK and the asking price is $2,100,000 US equivalent to about œ1,352,000 GB or
1,650.000 Euros at 30/08/10
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1352000</TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Defatted Milk Powder Plant</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3331</TD><TD CLASS='tablecell' VALIGN='top'>R Simon Dryers rotary cylinder drying plant for defatted
milk powder. This plant was built in 1983 but did only 4 weeks work. It is still in situ but it will be
dismantled and removed by the owner. The plant comprises a D110 double cylinder drum dryer and an S110
single drum unit. Each drum is 2.0 metres diameter x 4.0 metres long and is chrome plated. The plant comes
complete with drives, gearboxes, roll scrapers, knife scrapers, support bars, discharge conveyors, slurry
feed system, jet cooker and control panel. The plant is in good condition and is located in the EU but
not in the UK.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50000</TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Mixing Plant</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3016</TD><TD CLASS='tablecell' VALIGN='top'>Batch mixing plant for accurate blending of ingredients.
This plant was serving a pet food extruding line. The plant comprises the following :-
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 13000</TD></TR>
</TABLE><BR><BR>
<A NAME='conveyors'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Conveyors - Pneumatic</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3020</TD><TD CLASS='tablecell' VALIGN='top'>Roots type 47M-U-RA1 pneumatic conveyor with 15kw motor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='dust_handling'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Dust Handling - Reversejet Filters</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3021</TD><TD CLASS='tablecell' VALIGN='top'>WAM mini filter with stainless steel case.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='mixers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Mixers - High Speed Paddle</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3018</TD><TD CLASS='tablecell' VALIGN='top'>Dinnissen type SCH-MENGER twin paddle high speed mixer
with a working volume of 1000 litres, a 7.5kw drive and bomb door discharge and underhopper. Built 1992 No
920348.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='rotary_valves'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Rotary Valves - Blowing Seals</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3019</TD><TD CLASS='tablecell' VALIGN='top'>Rotolok 300 mm diameter blowing seal.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='weighers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Weighers - Bulk Weigher</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3017</TD><TD CLASS='tablecell' VALIGN='top'>Circular conical weighing hopper in steelwork with
loadcell mounts (but no loadcells) and pnuematic discharge slide to mixer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Pet Food Extruding Line</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2940</TD><TD CLASS='tablecell' VALIGN='top'>2 tph pet food extruding line built in 1987 including
live bin, variable speed feeder, two steam conditioners, Berga extruder, steam heated extrusion dryer and
extrusion cooler. This plant is dismantled and in storage. The plant comprises :-
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 25000</TD></TR>
</TABLE><BR><BR>
<A NAME='dischargers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Dischargers - Single Screw</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2942</TD><TD CLASS='tablecell' VALIGN='top'>200 mm diameter single screw discharger 2.2 metres long
with Tasc variable speed drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='electrical_equipment'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Electrical Equipment - Control Panels</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2945</TD><TD CLASS='tablecell' VALIGN='top'>Extruding line control equipment.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='extrusion_equipment'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Extrusion Equipment - Dryers and Coolers</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2946</TD><TD CLASS='tablecell' VALIGN='top'>Berga 2 tph single pass extrusion dryer with stainless
steel moving bed, variable speed drive, inlet hopper, high and low level switches, feed gate, vibrating
feed tray, 3 No steam radiators and 3 No 3kw fans. The dryer has overall dimensions of 2.4 metres wide x
8.0 metres long x 3.0 metres high. There is a set of support frames to lift the dryer a further 1.5 metres
so that the cooler can be fitted below it.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2947</TD><TD CLASS='tablecell' VALIGN='top'>Berga 2 tph single pass extrusion cooler 8.0 metres long
with 580 mm wide stainless steel moving bed and fan.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2944</TD><TD CLASS='tablecell' VALIGN='top'>Berga 200mm diameter single screw extruder 2.8 metres
inlet to outlet with 110 kw motor and vee belt drive. The barrel has steam inlet ports and steam jacketed
sections, support legs, some spares and an extrusion cutter. It is rated at up to 2 tph on cereal based
extrusions.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='pelleting'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Pelleting - Pellet Press Conditioners</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2943</TD><TD CLASS='tablecell' VALIGN='top'>400 mm diameter x 2.4 metre long stainless steel
conditioner with 11.0 kw drive. All contact parts are in stainless steel.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. <I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Straw Briquetting Plant</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3824</TD><TD CLASS='tablecell' VALIGN='top'>Complete straw briquetting plant by New Air comprising a
bale bunker with breaker/chopper. The bunker will accept a range of bale sizes including big bales and
round bales. The chopped straw is conveyed to an 18.5 kw hammermill then into a 5.5 kw fan that transports
the milled straw to a straw silo with a sweep arm discharger. The silo has a working volume of about 5
cubic metres and a set of vertical dust socks to dissipate the air from the transport fan. The socks are
supported on a frame with a vibrating motor that shakes the dust out of the socks intermittently. The
straw silo feeds a Bavaria BP500 piston briquetting machine with a 15 kw motor, variable speed feeder,
motorised vertical screw press and motorised die pressure adjustment. It has a full set of sensors and
controls to automate production. The die is 50 mm diameter and is water cooled. The briquette stream is
forced along a cooling conveyor and up to a finished product hopper. The continuous stream breaks into
smaller pieces as it exits the conveyor and falls into the hopper. The hopper has a vibrating discharge
tray feeder with a perforated base which sieves out the fines as the briquettes are being bagged. Output
up to 250 kg per hour of briquettes. The plant requires dry straw at around 15% moisture content. This
plant may be around 30 years old but has done little work and can still be supported by New Air.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 35000</TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Wood Chipping Plant</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3706</TD><TD CLASS='tablecell' VALIGN='top'>Waste wood chipping plant comprising the following :-
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 17500</TD></TR>
</TABLE><BR><BR>
<A NAME='conveyors'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Conveyors - Belt</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3708</TD><TD CLASS='tablecell' VALIGN='top'>450 mm troughed chevron belt conveyor 6.0 metres long
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3710</TD><TD CLASS='tablecell' VALIGN='top'>450 mm troughed chevron belt conveyor 8.0 metres long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='mills'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Mills - Pulverisers</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3709</TD><TD CLASS='tablecell' VALIGN='top'>BJD 12 x 14 pulveriser with 30 kw motor, starter and
supporting steelwork. There are some spare screens with this pulveriser.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='sieves,_screens_and_sifters'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Sieves, Screens & Sifters - Inclined Deck</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3711</TD><TD CLASS='tablecell' VALIGN='top'>Reciprocating inclined single deck sieve with 3.0 metre x
1.25 metre screen area and supporting steelwork. It is fitted with a 6.0 mm screen.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<A NAME='timber_extraction_and_processing'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Timber Extraction & Processing - Shredder - Horizontal
Grinder</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3707</TD><TD CLASS='tablecell' VALIGN='top'>Lescha S380EHM pallet crusher shredder with 90 kw motor
adjustable shredding gap and 1.5 metre x 3.0 metre hopper with conveyor. Out put depends on type of wood
and cutter gap setting but can be up to 10 tph. This machine has all hydraulics and controls for automatic
operation.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Wood Fuel Pelleting Plant 3</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4035</TD><TD CLASS='tablecell' VALIGN='top'>Wood fuel pelleting plant to produce and pack up to 1.3
tph of good quality 6.0 mm pellets from dry softwood chips or sawdust. The plant comprises :- A Charlton
woodchip/sawdust open topped lorry body with sheet cover and a variable speed belt discharge. The lorry
body will hold up to 5 tonnes of woodchip. From the lorry body a 4.0 metre chevron belt conveyor carries
the product into a building and drops it into a Christy B14 hammermill with a 30kw drive, inlet magnet and
underhopper. The milled product is discharged from the underhopper via a variable speed screw conveyor
which feeds a second conveyor which transfers the product to the pellet press conditioner. There is an
aspiration system from the hammermill underhopper to the pellet cooler cyclone to pull air through the
hammermill. The milled product, at a controlled rate, feeds into the pellet press conditioner which has an
11.0 kw drive. Fines from the cooler cyclone are also dropped into the conditioner and water can be added
at this point if the moisture content is too low. The press conditioner drops the product into a force
feeder on the front of the pelleting press which is a CPM 4100/6000 with a 132 kw drive. The pellets pass
from the press onto a 5.0 metre long twin chain conveyor and up a 9.0 metre high stainless steel belt and
bucket elevator to a Geelen counterflow cooler. The cooler has an inlet rotary valve, fan and cyclone with
a rotary valve feeding the fines back into the press conditioner. The cooler is sitting above a Turner 6
x 4 pellet sieve which feeds either a big bag or a Walthambury belt fed bagger. The bagger will weigh from
5.0 to 25.0 kg and it has a pneumatic bag clamp. Filled bags are hand placed into a Star impact heat
sealer. The fines from the pellet sieve go into a big bag which can be added back to the bunker/trailer
for recycling or bagged as a marketable commodity as done by the present owner. There is a small
compressor with the plant and many pellet press spares including some dies. The dies include one unused
and two partly used wood pellet dies and a number of part used dies which, we believe were for grass and
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 80000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4125</TD><TD CLASS='tablecell' VALIGN='top'>Wood fuel pelleting plant located in Latvia. The plant
comprises a wet wood chip receiving bunker,gas fired rotary drum dryer, Buhler DFZC-1265 hammermill with
250 kw motor, sawdust screening plant, sawdust bunker, Buhler RWPR-900 pellet press with 250 kw motor,
Buhler counterflow cooler type DFKG -16, pellet sieve type DFTA-12, steam raiser, control equipment and
all associated handling equipment. The plant output is up to 5 tph. Offers around œ300,000 Euros will be
considered.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 275000</TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Wood Shavings Plant</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3963</TD><TD CLASS='tablecell' VALIGN='top'>Wood shavings production plant less drying facilities but
including a baler. The plant comprises 2 x 2.5 metre log boxes on a Blue Diamond planing machine with 4 x
8 bladed cutting heads. This machine is thought to be around 1997/98 vintage and the output will be up to
2 tph. There is a blade sharpener and some spare blades with the planer. There are four belt conveyors of
varying lengths to transfer shavings to and from a screener, which is included, and a dryer, which is not
included. There is also a two ram shavings baler with 30kw powerpack, thougt to be by Snowflake. This
plant was being powered by a 200KVA Cummins/Newage generating set which can be purchased at extra cost,
see UCPE-3597
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 33000</TD></TR>
</TABLE><BR><BR>
<H3>Complete Plants</H3>
<A NAME='complete_plants'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Complete Plants - Wood Shavings Plant 2</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4210</TD><TD CLASS='tablecell' VALIGN='top'>Wood shavings plant comprising 3 No Salsco single head
log planing machines built 2007, a 6 tph evaporative capacity (at 1000 deg C) triple pass rotary drum
dryer, believed to be a copy of a Swiss Combi, with fan and cyclone, an Energy Unlimited 18 Million BTH
biomass burner built in 2007 with sawdust feeder and fans, a single pass shavings cooling drum with fan
and cyclone, 3 No 600 mm wide twin chain shavings conveyors approx 11 metres, 14 metres and 20 metres
long, a 600 mm diameter x 8 metre long U trough screw conveyor, a 600 mm x 15 metre long U trough screw
conveyor with a flared top and a Challenger CM 2127 automatic baling machine with feed hopper, twin screw
feeder, product weigher, form fill and seal bale former, powerpacks and controls. The baler was built in
2008 and is capable of up to 200 x 20kg bales per hour. This is not quite a complete plant but it could
easily be made into one. Offers around
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 210000</TD></TR>
</TABLE><BR><BR>
<H3>Baling Machines</H3>
<A NAME='baling_machines'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Baling Machines - Bale Palletiser</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2540</TD><TD CLASS='tablecell' VALIGN='top'>Pieri/Verbruggan collator and film wrapper for small
polythene wrapped bales. The collator section forms a block of 12 bales and ejects them to a rotating head
film wrapper. This block is moved along a powered roller trackand parked on a section of belt conveyor. A
second block of similarly wrapped bales is parked on an adjacent section of belt conveyor. The two packs
are folded into a block of 24 bales by raising the two belt conveyor sections. The block is thens moved to
a top sheeter and turntable wrapper. The block of 24 bales is then lifted onto a pallet and ejected onto
a gravity roller track. The whole unit is about 18 metres long x 3.0 metres wide and 3.0 metres high and
it has all controls and sensors and is surrounded by a security barrier. It is capable of 1000 packs per
hour and has done very little work.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 70000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4000</TD><TD CLASS='tablecell' VALIGN='top'>Snowflake shavings baler with electro hydraulic
powerpack. It is believed to be about 12 years old and will work at up to 120 bales per hour. Bale size is
450 mm x 350 mm x 750 mm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 16500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4096</TD><TD CLASS='tablecell' VALIGN='top'>Guttridge three ram shavings baler with 11 kw hydraulic
powerpack. Needs to be reassembled and bale outlet repaired and reconfigured.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4184</TD><TD CLASS='tablecell' VALIGN='top'>Challenger CM 2127 hydraulic baler built in 2007
delivered early 2008. This is a two ram baler with two hydraulic drives. The baler is operating on wood
shavings and it has a hopper with screw dischargers, a product weighing system and automatic polythene
feed and pack forming system with heat sealers. The bales are ejected through belt squeezers to ensure
regular shape. The baler has a control panel and safety barriers. There is a roller track on the outlet
for finished bales. Will make up to 200 x 20kg bales per hour. Needs a compressed air supply. Can bale a
range of products including chopped straw and wood chip.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50000</TD></TR>
</TABLE><BR><BR>
<A NAME='big_bag_handling'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Big Bag Handling - Bag Filling System</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3010</TD><TD CLASS='tablecell' VALIGN='top'>Big bag support frame 1.23 metres x 1.2 metres x 1.69
metres high for supporting big bags during filling and emptying. They are two way entry for fork lift
truck, enclosed on all four sides and are stackable.<I><b> (12 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='biomass'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Biomass - Biomass Burner</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4172</TD><TD CLASS='tablecell' VALIGN='top'>Energy Unlimited biomass burner rated at 18,000,000 BThU
(5.27MW). Believed to have been built in 2007. This burner has a sawdust feeding system comprising a twin
screw discharger that feeds into a pneumatic transfer sytem at a controlled rate. A blower and pipeline
transfer the sawdust to the biomass burner. Control panel is included.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 57000</TD></TR>
</TABLE><BR><BR>
<A NAME='brewery_equipment'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Brewery Equipment - Beer Dispensers</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2906</TD><TD CLASS='tablecell' VALIGN='top'>Stainless steel pressurised beer dispensers to work with
CO2 cylinders. There are about 27 x 10 litre, 13 x 15 litre and 21 x 20 litre. There are also some CO2
cylinders and beer taps with pipes.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
</TABLE><BR><BR>
<A NAME='bunker_feeders'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Bunker Feeders - Screw</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3011</TD><TD CLASS='tablecell' VALIGN='top'>Lorry tipping hopper with 350 mm diameter x 3.0 metre
long screw discharger on the outlet. No drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
</TABLE><BR><BR>
<A NAME='compressors'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Compressors - Rotary</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3181</TD><TD CLASS='tablecell' VALIGN='top'>Compair Cyclon 330 rotary compressor in acoustic
enclosure. This is a 1997 machine with a 34.5 kw motor. It has done 60,864 hours 41,785 of which have been
under load. The compressor will deliver 4.9 cubic metres per minute ( 173 cfm ) at a working pressure of
7.5 bar.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3513</TD><TD CLASS='tablecell' VALIGN='top'>Hydrovane 822 screw compressor with 22 kw motor. Output
is 122 cfm at 8 bar. It has 14708 hours on it and has been regularly serviced.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
</TABLE><BR><BR>
<A NAME='conveyors'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Conveyors - Belt</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2907</TD><TD CLASS='tablecell' VALIGN='top'>Beaufort Conveyors FB300 flat belt conveyor 1.58 metres
overall with top covers and supporting legs. Belt width is 300 mm and inlet to outlet length is 1.25
metres. The drive is via a motorised drum.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2908</TD><TD CLASS='tablecell' VALIGN='top'>Beaufort Conveyors 300 mm wide flat belt conveyor 1.46
metres overall with supporting legs. No covers, no drive drum, no belt and no outlet end.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2916</TD><TD CLASS='tablecell' VALIGN='top'>400 mm wide troughed chevron belt conveyor 6.0 metres
long
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2917</TD><TD CLASS='tablecell' VALIGN='top'>400 mm wide troughed chevron belt conveyor 9.0 metres
long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2948</TD><TD CLASS='tablecell' VALIGN='top'>Wavy wall belt conveyor 1.8 metres long with side mounted
geared drive and 30 mm high walls 200 mm apart. The wavy walls need replacing.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2949</TD><TD CLASS='tablecell' VALIGN='top'>Wavy wall belt conveyor 3.12 metres long with side
mounted geared drive and 30 mm high walls 200 mm apart. The wavy walls need replacing.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2954</TD><TD CLASS='tablecell' VALIGN='top'>Wavy wall belt conveyor 9.0 metres long with side mounted
geared drive and 30 mm high walls 250 mm apart. The wavy walls need replacing.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2956</TD><TD CLASS='tablecell' VALIGN='top'>Dyna Con 290 mm wide plastic link belt conveyor with 25
mm high cleats on 300 mm centres. The conveyor is 4.5 metres long and was built by UPM Conveyor Co. It has
a side mounted drum drive and sectional Aluminium body sections.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2957</TD><TD CLASS='tablecell' VALIGN='top'>Dyna Con 290 mm wide plastic link belt conveyor with 25
mm high cleats on 300 mm centres. The conveyor is 8.0 metres long and was built by UPM Conveyor Co. It has
a side mounted drum drive and sectional Aluminium body sections.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3067</TD><TD CLASS='tablecell' VALIGN='top'>750 mm wide flat belt conveyor with side plates and
idlers. It is 45 metres long and was built to transport straw and has 5 No electro pnuematic diverters to
discharge product from the belt. Done very little work.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3703</TD><TD CLASS='tablecell' VALIGN='top'>400 mm wide troughed chevron belt conveyor 3.0 metres
long. This conveyor has a light weight box section frame and a 110 volt in drum drive with starter.<I><b>
(25 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 550<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3745</TD><TD CLASS='tablecell' VALIGN='top'>380 mm wide flat belt conveyor 4.6 metres long with
galvanised case.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3887</TD><TD CLASS='tablecell' VALIGN='top'>Carier 230 mm belt conveyor 20 metres long with
galvanised case, inlet hopper, tripper unloader and reload chute.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4048</TD><TD CLASS='tablecell' VALIGN='top'>300 mm wide conveyor belt about 15 metres long, average
condition.œ3.0 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 45</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4049</TD><TD CLASS='tablecell' VALIGN='top'>450 mm wide conveyor belt about 13 metres long, average
condition. œ4.5 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 58.5</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4050</TD><TD CLASS='tablecell' VALIGN='top'>450 mm wide conveyor belt about 10 metres long, poor
condition. œ3.5 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 35</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4051</TD><TD CLASS='tablecell' VALIGN='top'>440 mm wide conveyor belt about 8 metres long, average
condition. œ4.5 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 36</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4052</TD><TD CLASS='tablecell' VALIGN='top'>380 mm wide conveyor belt about 10 metres long, average
condition. œ4.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 40</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4053</TD><TD CLASS='tablecell' VALIGN='top'>360 mm wide conveyor belt about 15 metres long, average
condition. œ4.0 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 60</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4054</TD><TD CLASS='tablecell' VALIGN='top'>375 mm wide conveyor belt about 15 metres long, average
condition. œ4.0 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 60</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4055</TD><TD CLASS='tablecell' VALIGN='top'>390 mm wide conveyor belt about 10 metres long, average
condition. œ4.0 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 40</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4134</TD><TD CLASS='tablecell' VALIGN='top'>Carier 380 mm wide belt conveyor 15.0 metres long with
galvanised case and tripper unloader.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4135</TD><TD CLASS='tablecell' VALIGN='top'>Carier 230 mm wide belt conveyor 22.0 metres long with
galvanised case.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 900</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4154</TD><TD CLASS='tablecell' VALIGN='top'>800 mm wide troughed chevron belt conveyor 10.0 metres
long with side mounted in-line head drive and enclosed slide plate belt return with some idlers. This
conveyor has a power loader receiving hopper with support legs and outlet slide to the conveyor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4155</TD><TD CLASS='tablecell' VALIGN='top'>800 mm wide troughed chevron belt conveyor 10.0 metres
long with side mounted in-line head drive and enclosed slide plate belt return with some idlers.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2601</TD><TD CLASS='tablecell' VALIGN='top'>Carier 125 mm wide chain and flight conveyor 18.0 metres
long with end outlet and 5 No intermediate outlets. Part of this conveyor is double deck. It is in poor
condition but chain is OK.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2790</TD><TD CLASS='tablecell' VALIGN='top'>Guttridge 200 mm wide x 265 mm deep galvanised chain and
flight conveyor 5.0 metres long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3132</TD><TD CLASS='tablecell' VALIGN='top'>300'-0" of Carier 12" conveyor chain with flights on 12"
centres at œ12 per foot.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3190</TD><TD CLASS='tablecell' VALIGN='top'>Unused Carier C250 galvanised chain and flight conveyor
head only with 7.5 kw drive. The conveyor trough is 250 mm wide x 350 mm deep.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3258</TD><TD CLASS='tablecell' VALIGN='top'>Chain and flight conveyor with 400 mm wide x 380 mm deep
painted case 15.0 metres long and 5.5 kw drive. The conveyor has two chains with 50 mm x 50 mm wooden
slats fixed across the chains at 210 mm pitch. Output could be up to 100 tph on grain. This conveyor has
been overhauled and is in good working order. Thought to have been built by Goffroy in France.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3619</TD><TD CLASS='tablecell' VALIGN='top'>New Carier Conveyor Chain. Supplied in rolls approx 10' -
0" long with joining link. <br>C5 - £6.50 per foot <br>C8 - £6.70 per foot <br>C8HD -
£11.25 per foot<br> C9 - £12.80 per foot<br> C12 - £25.40 per foot <br>C12 with plastic
quiet running flights - £28.25 per foot <br>Full range of sprockets available bored to suit
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> - </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3740</TD><TD CLASS='tablecell' VALIGN='top'>Large quantity of conveyor chain some with flights some
without. Mostly malleable steel type links such as Ewart and Pennine.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3755</TD><TD CLASS='tablecell' VALIGN='top'>8' - 0" sections of Carier 8" chain and flight conveyor
case 8" deep, galvanised<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 75<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3763</TD><TD CLASS='tablecell' VALIGN='top'>Skandia 200 mm wide chain and flight conveyor 2.5 metres
long with galvanised case.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3764</TD><TD CLASS='tablecell' VALIGN='top'>Redler 200 mm eleveyor with D shaped flights and 90
degree bend taking it from a horizontal conveyor to a vertical elevator. Believed to have 13.0 metres of
painted case.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3817</TD><TD CLASS='tablecell' VALIGN='top'>Rutherford 200 mm steel cased flow and return chain and
flight conveyor 4.5 metres long. Rated at up to 40 tph. This conveyor has a 300 mm deep trough.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3818</TD><TD CLASS='tablecell' VALIGN='top'>Rutherford 200 mm steel cased chain and flight conveyor
20 metres long. This conveyor has a 230 mm deep trough.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3886</TD><TD CLASS='tablecell' VALIGN='top'>Carier 125 mm chain and flight conveyor 35.0 metres long
with painted case 2.2 kw drive and 200 mm deep case giving it a capacity of up to 25 tph on grain.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4064</TD><TD CLASS='tablecell' VALIGN='top'>Carier 8/30 or 8/40 chian and flight conveyor 13.1 metres
long with galvanised case and 2 No chain wheel operated outlet slides. There is no motor on this
conveyor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4065</TD><TD CLASS='tablecell' VALIGN='top'>Law Denis 300 mm wide chain and flight conveyor in 430 mm
deep painted case. There 4 No heads, 4 No tails, a selection of standard lengths of trough, some drives
and one bend so various combinations can be used. Price based on an 8.5 metre conveyor.<I><b> (4
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4068</TD><TD CLASS='tablecell' VALIGN='top'>Perry 200 mm wide chain and flight conveyor 10.97 metres
long with galvanised case and 4 No outlet slides. Believed to be capable of up to 40 tph on cereals.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4069</TD><TD CLASS='tablecell' VALIGN='top'>Skandia 200 mm tube type chain and flight conveyor 18.0
metres long. This conveyor has a 240 mm diameter galvanised case and is a bit rough.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4124</TD><TD CLASS='tablecell' VALIGN='top'>Carier 5/25 chain and flight conveyor 45.73 metres
long.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1850<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4178</TD><TD CLASS='tablecell' VALIGN='top'>Twin chain conveyor 600 mm wide a 525 mm deep with
working trough depth of 315 mm. The chain returns on the underside of the box. This conveyor is about 20
metres long and is operating up an incline. It has top covers, supporting steelwork and a walkway on one
side. Suitable for wood shavings or other low density products.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4179</TD><TD CLASS='tablecell' VALIGN='top'>Twin chain conveyor 600 mm wide a 525 mm deep with
working trough depth of 315 mm. The chain returns on the underside of the box. This conveyor is about 14.0
metres long and is operating up an incline. It has top covers and supporting steelwork. Suitable for wood
shavings or other low density products.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4193</TD><TD CLASS='tablecell' VALIGN='top'>Twin chain conveyor 600 mm wide a 525 mm deep with
working trough depth of 315 mm. The chain returns on the underside of the box. This conveyor is about 11
metres long and is operating up an incline. It has top covers, supporting steelwork and a walkway on one
side. Suitable for wood shavings or other low density products.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2840</TD><TD CLASS='tablecell' VALIGN='top'>Aromamalz inclined magnetc belt conveyor for moving metal
cans. This conveyor is 10 metres long and has a 90 mm wide belt, adjustable width guides and stainless
steel case. Still in situ.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2367</TD><TD CLASS='tablecell' VALIGN='top'>Interoll (Rulmeca) 2.2kw motorised belt conveyor drum
built in 2004. Drum is 230mm diameter x 630mm face width and it has a linear speed of 0.63
metres/sec.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3804</TD><TD CLASS='tablecell' VALIGN='top'>Large belt elevator and screening system in four
sections. There is a receiving hopper for filling with a power shovel. This section is 4.0 metres long and
has a 1.0 metre wide smooth slightly troughed belt with a spring mounted impact plate below it. The
second stage is 8.0 metres long and has a 1.0 metre wide smooth troughed belt which rises to 4.0 metres
high. On the discharge end of this conveyor there is a 1.5 metre wide x 2.2 metre long vibrating finger
screen with seven rows of fingers with about 6.0 mm spacing. The overs from the screen fall onto a picking
table which has a receiving hopper on the inclined 3.0 metre long section followed by a 4.2 metre long
four station picking table with walkways, handrails and canvas top cover. The belt is chevron type 1.0
metre wide. The finger screen and picking table have hydraulic motors and a 15kw power pack. The main
conveyors have electric motors. The unit was built in 1991.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 18000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1519</TD><TD CLASS='tablecell' VALIGN='top'>Pneumatic transfer system for herbs or low density
products comprising a small hopper with a variable speed tray feeder discharge feeding into a suction
pipeline. The suction line goes to a small receiving hopper with an Airmaster RJX 3/9/33 reversejet filter
with 1.5kw fan and silencer. The hopper outlet is fitted with a pneumatic slide for releasing the batch.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2232</TD><TD CLASS='tablecell' VALIGN='top'>Aerzen GMA 12.4 blower, no motor. Ser No 292551 built
1987.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2834</TD><TD CLASS='tablecell' VALIGN='top'>Roots Holmes Dresser RA1 blower type 65M on base frame
with silencer and 30 kw motor.This unit is set up to suck not blow.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2850</TD><TD CLASS='tablecell' VALIGN='top'>Howden Wade SRO 44-7288 blower on base with 7.5kw motor.
There is no pump top or inlet pipe and silencer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2854</TD><TD CLASS='tablecell' VALIGN='top'>Kongskilde TRL 55 blower with 4.0 kw motor and cyclone.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2876</TD><TD CLASS='tablecell' VALIGN='top'>Acoustic enclosure for blower with internal dimensions of
1.5 metres long x 0.9 meters wide x 1.5 metres high.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2878</TD><TD CLASS='tablecell' VALIGN='top'>Small cyclone receiver with top mounted Halifax Fan
Company PNB116 fan.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3044</TD><TD CLASS='tablecell' VALIGN='top'>Farley Green vacuum loading system for transferring
bagged powders to a bulk container. This system was supplied in September 2004 and has done little work.
Built in food grade stainless steel. The system comprises an aspirated bag tip with rare earth magnetic
grid, a powder injector, vacuum pump, filter module, suction module, discharge module, pipework and
controls. Was working on sugar starch.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3402</TD><TD CLASS='tablecell' VALIGN='top'>Kongskilde TRL 500 pneumatic conveyor with 37 kw electric
motor drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3427</TD><TD CLASS='tablecell' VALIGN='top'>Kongskilde pto driven sucker blower with lorry loading
duct and cyclone. The cell wheel is a type CA 65 and it uses 0K 160 pipework.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3459</TD><TD CLASS='tablecell' VALIGN='top'>Kongskilde TRL150 blower with motor (believed to be 11.0
kw). Large selection of ducting available at extra cost.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3781</TD><TD CLASS='tablecell' VALIGN='top'>Kongskilde blower with 18.5kw motor, probably a TRL 200.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3782</TD><TD CLASS='tablecell' VALIGN='top'>400 mm diameter cyclone x 1600 mm high with 5.5 kw top
mounted fan but no rotary valve. This could be used as a suction system for free flowing products if a
rotary valve was fitted to the cyclone outlet.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3813</TD><TD CLASS='tablecell' VALIGN='top'>Aerzen blower pump for a pneumatic conveying system. No
base, no drive. This looks like a GM 13.7 and has sealed ports and new paint so may be a refurbished
spare pump.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3848</TD><TD CLASS='tablecell' VALIGN='top'>Aerzen blower believed to be GM 13.7. It has an 18.5 kw
2920 rpm drive motor but no base, belts or guard. Pulleys will give blower speed of 1750 rpm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3872</TD><TD CLASS='tablecell' VALIGN='top'>Neuero blower with what is believed to be a 2.2kw 2880
rpm motor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4082</TD><TD CLASS='tablecell' VALIGN='top'>Neuero PTO sucker blower on wheels.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4177</TD><TD CLASS='tablecell' VALIGN='top'>Pneumatic transfer system for fines from the
shavings.This comprises a cyclone with top mounted fan and rotary valve on the outlet.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3744</TD><TD CLASS='tablecell' VALIGN='top'>Svea 125 mm diameter auger 1.8 metres long with intake
hopper and 2.2 kw drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3761</TD><TD CLASS='tablecell' VALIGN='top'>Law Denis 230 mm diameter auger 2.9 metres long with 2.2
kw drive and adjustable intake.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 450<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3805</TD><TD CLASS='tablecell' VALIGN='top'>180 mm diameter round case screw conveyor 9.5 metres long
with intermediate bearings, intermediate outlet, 75 mm pitch flight on inlet and 2.2 kw gearmotor and
chain drive. Some damage to motor terminal box.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3806</TD><TD CLASS='tablecell' VALIGN='top'>180 mm diameter round case screw conveyor 7.25 metres
long with intermediate bearings, intermediate outlet, 75 mm pitch flight on inlet and 2.2 kw gearmotor and
chain drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 900</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3819</TD><TD CLASS='tablecell' VALIGN='top'>Heavy duty 200 mm diameter auger 7.0 metres long with
drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3853</TD><TD CLASS='tablecell' VALIGN='top'>150 mm diameter round case screw 1.9 metres long with
mountung for an in-line head drive but drive is missing. This has an 850 mm long inlet.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3902</TD><TD CLASS='tablecell' VALIGN='top'>Cimbria 300 mm diameter round cased screw conveyor 6.85
metres long with 9.2 kw inline geared drive and adjustable inlet to control in feed rate. The inlet flight
pitch is 120 mm. This machine was built in 2005, is type SOH300 and is little used.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3921</TD><TD CLASS='tablecell' VALIGN='top'>Westfield 6.0 - 36 auger on wheels. This is a little used
6" auger 36' long with a three phase motor, shaft drive to top pulley, vee belt drive, angle adjusting
winch and pnuematic tyres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3942</TD><TD CLASS='tablecell' VALIGN='top'>275 mm diameter x 4.26 metres long round cased screw
conveyor with 5.5 kw drive and short powered in-feed screw on the inlet.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3999</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter x 4.26 metres long round cased screw
conveyor contrawound to a central discharge. Has 2.2 kw drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 900</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4036</TD><TD CLASS='tablecell' VALIGN='top'>Astwell transmatic auger 200 mm diameter x 14.6 metres
long with 15kw drive, starter and cable. The auger has a galvanised case and it is mounted on an
undercarriage with caster wheels and winch for height adjustment.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2650</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4037</TD><TD CLASS='tablecell' VALIGN='top'>Farm King auger on an undercarriage with pneumatic tyres.
The auger is 178 mm diameter x 15.5 metres long and has a painted case and height adjusting winch. It has
a 7.5kw drive mounted on the chassis with vee belts, a right angle gearbox and a shaft to the pulley
arrangement at the outlet end of the auger.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4074</TD><TD CLASS='tablecell' VALIGN='top'>150 mm diameter auger 5.5 metres long with galvanised
case and drive. The inlet end has been cut off so a new one will need to be made.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4108</TD><TD CLASS='tablecell' VALIGN='top'>150 mm diameter x 4.0 metre long grain auger with
drive.<I><b> (4 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4196</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter x 3.96 long round cased screw conveyor
with 2.2 kw drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 650</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4197</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter x 3.35 long round cased screw conveyor
with 2.2 kw drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 600</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3780</TD><TD CLASS='tablecell' VALIGN='top'>305 mm wide heavy duty single chain shrouded chain
conveyor 11.4 metres long. This conveyor has a 2.2kw motor and the trough is 360 mm deep.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3982</TD><TD CLASS='tablecell' VALIGN='top'>GAME Engineering 300 mm shrouded chain conveyor head and
tail only. No chain and no body sections. Drive is 1.5kw.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4088</TD><TD CLASS='tablecell' VALIGN='top'>Perry 1200 mm wide twin chain conveyor 5.0 metres long
with galvanised case, side mounted drive and swan neck bend. Was built for low density products such as
wood shavings.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1633</TD><TD CLASS='tablecell' VALIGN='top'>Carier 6" U trough screw conveyor 2.75 metres long with
tail drive and open end discharge. Part of a complete 12-14 x 25 kg bag per minute packing line.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1670</TD><TD CLASS='tablecell' VALIGN='top'>U trough screw conveyor to fit below hopper UCPE 1669. It
is 350 mm dia x 3.45 metres long with a 2.50 metre long intake section with 200 mm pitch flight and top
mounted head drive. This discharger is part of a complete bulk pellet screening, coating and loading
plant.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1671</TD><TD CLASS='tablecell' VALIGN='top'>350 mm diameter x 2.50 metre long U trough screw conveyor
with drive mounted above inlet.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 850</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2273</TD><TD CLASS='tablecell' VALIGN='top'>375 mm diameter U trough screw conveyor 6.0 metres long
but no drives.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2526</TD><TD CLASS='tablecell' VALIGN='top'>Heavy duty U Trough screw conveyor 350 mm diameter x 8.0
metres long with a 160 mm diameter centre tube, thick flights and a stainless steel case. This unit was
used to convey ash.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2527</TD><TD CLASS='tablecell' VALIGN='top'>Heavy duty U Trough screw conveyor 350 mm diameter x 7.0
metres long with a 140 mm diameter centre tube, thick flights and a mild steel case which is in poor
condition. This unit was used to convey ash.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3474</TD><TD CLASS='tablecell' VALIGN='top'>200 mm diameter U trough screw conveyor 4.0 metres long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3601</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter x 4.0 metre long U trough screw conveyor
with drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 600</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3810</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter U trough screw conveyor 4.0 metres long
with drop bottom but no drive end.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3811</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter U trough screw conveyor 4.0 metres long
with drop bottom and drive. This has adjustable crescent blades to provide a mixing action in the
conveyor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3851</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter x 4.76 metre long U trough screw conveyor
with top mounted head drive. This conveyor has an oversize centre tube.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4070</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter U trough screw conveyor with 3.75 metres
of horizontal conveyor and a 1.75 metres inclined head section with drive. There is a new universal joint
in the centre shaft to convey material round the bend.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 850</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4091</TD><TD CLASS='tablecell' VALIGN='top'>350 mm diameter x 5.7 metre long U trough screw conveyor
with side mounted head drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4097</TD><TD CLASS='tablecell' VALIGN='top'>Carier 150 mm diameter U trough screw conveyor 3.66
metres long with side mounted head drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4157</TD><TD CLASS='tablecell' VALIGN='top'>400 mm diameter x 5.0 metre long U trough screw conveyor,
no drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4174</TD><TD CLASS='tablecell' VALIGN='top'>600 mm diameter x 10.0 metre long U trough screw conveyor
with top mounted tail drive and open discharge end with hanger bearing. This has been on wood shavings so
drive is small and low speed.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4180</TD><TD CLASS='tablecell' VALIGN='top'>600 mm diameter x 14.5 metre long U trough screw conveyor
with flared sides and two hydraulically operated outlet slides in the base. The slides are curved to fit
the curved base.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3915</TD><TD CLASS='tablecell' VALIGN='top'>Mogensen vibrating tube conveyor type BL24-86. This unit
is 300 mm diameter x 4.26 metres long with 2 No Invicta 960 rpm vibrating motors.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
</TABLE><BR><BR>
<A NAME='dischargers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Dischargers - Rotary Metering Type</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2260</TD><TD CLASS='tablecell' VALIGN='top'>Buhler rotary bin discharger with feed control
gate.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3779</TD><TD CLASS='tablecell' VALIGN='top'>200 mm diameter tapered srew discharger 3.98 metres long
with 1.75 metre long inlet and side mounted tail drive
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3849</TD><TD CLASS='tablecell' VALIGN='top'>200 mm diameter x 3.5 metres long round cased discharger
with open end outlet, 600 mm long x 300 mm wide inlet and underslung tail geared drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2574</TD><TD CLASS='tablecell' VALIGN='top'>2 x 200 mm diameter twin tapered screw discharger 2.43
metres long with 1.9 metre inlet and two side mounted tail drives.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2813</TD><TD CLASS='tablecell' VALIGN='top'>2 x 150 mm diameter twin screw discharger 1.4 metres long
with 960 mm long intake section and side mounted head drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3751</TD><TD CLASS='tablecell' VALIGN='top'>Stainless steel twin screw discharger 2 x 200 mm x 3.69
metres long including 2.56 metre inlet section. The two flights are different, one is 160 mm pitch on a 75
mm shaft and the other is 110 mm pitch on a 60 mm shaft. There are no drives.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4089</TD><TD CLASS='tablecell' VALIGN='top'>Twin screw discharger 2 x 250 mm x 2.65 metres long with
1.8 metre long inlet and side mounted tail drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4209</TD><TD CLASS='tablecell' VALIGN='top'>2 x 200 mm diameter twin tapered screw discharger 2.1
metres long with centre outlet and side mounted drive.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 600<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='ducting'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Ducting - Round and Square</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2839</TD><TD CLASS='tablecell' VALIGN='top'>Carier 5" flanged 45 degree bends.<I><b> (9
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3606</TD><TD CLASS='tablecell' VALIGN='top'>Heavy guage stainless steel ducting 250 mm ID with 1.5 mm
wall thickness. 1 x 1.7 metres long and 2 x 6.1 metres long. œ50.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 695</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3748</TD><TD CLASS='tablecell' VALIGN='top'>Carier universal bends with short extension chutes and
200 mm x 200 mm flanged ends<I><b> (24 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 75<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3769</TD><TD CLASS='tablecell' VALIGN='top'>Carier universal bends with long extension chutes and 200
mm x 200 mm flanged ends<I><b> (24 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='dust_handling'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Dust Handling - Cartridge Filters</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2805</TD><TD CLASS='tablecell' VALIGN='top'>200 mm diameter x 805 mm long dust filter cartridges with
235 mm diameter plastic top with 83 mm diameter inlet.<I><b> (8 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 20<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4031</TD><TD CLASS='tablecell' VALIGN='top'>DCE Torit Unicell dust collector model C48/4. It has 48
square metres of filter area and a 5.5kw fan. The filter has an underhopper with a rotary valve on the
outlet. The rotary valve needs overhauling and the filter needs new cartridges.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1640</TD><TD CLASS='tablecell' VALIGN='top'>Vortex plastic cased 300 mm dia axial fan with flexible
dust collection pipe. Part of a complete 3-4 x 25 kg bag per minute packing line.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3783</TD><TD CLASS='tablecell' VALIGN='top'>900 mm wide Milltech dust separation unit with outlet
bend but no rotary valve.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3859</TD><TD CLASS='tablecell' VALIGN='top'>Dantherm NFK 2000 dust collector model 6 + 2 HJLR built
in 1996. It has 7 No 1.1 kw axial regeneration fans and 2 No 45 kw centrifugal fans in galvanised acoustic
enclosures to handle the dust laden air. There is a third 37 kw centrifugal fan in a galvanised acoustic
enclosure probably to transport the dust from the filter to a silo. The filter is for outdoor use and is a
galvanised enclosure with conveyor discharge into a rotary valve. The filter enclosure is on supporting
steelwork and the overall dimensions excluding fans is 10.8 metres long x 2.4 metres wide x 5.0 metres
high. It needs to have a shut down period for the regeneration fans to perform a full bag cleaning
operation, the frequency depends on dust burden, may only be once in 24 hours. Believed to have 350
cylindrical bags with a total area of 5,600 square feet to handle 35,000 cfm. Air on bag speed 6.25 fpm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2563</TD><TD CLASS='tablecell' VALIGN='top'>DCE Dalamatic type DLM V4/7 B reversejet dust filter
unit with 4.0 square metres of filter area but no fan.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 650</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2577</TD><TD CLASS='tablecell' VALIGN='top'>Reversejet filter with 810 mm diameter case 1400 mm deep
with conical hopperer outlet. The filter has 13 No cylindrical bags 915 mm long giving a filter area of
4.4 square metres. There is a Derion RV200 rotary valve on the outlet. This is a blowline receiver and has
no fan.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 600</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2597</TD><TD CLASS='tablecell' VALIGN='top'>Heaton Green EJF 12-55/10/1.5 reversejet dust filter with
1.5 kw fan.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2808</TD><TD CLASS='tablecell' VALIGN='top'>DCE Dalamatic insertable reversejet filter type DLM
V10/10F3. This unit is top entry and has a 2.2kw fan. There appears to be only six out of the ten bag
inserts with the filter and they are each only 700 mm long. They need to be 1000 mm long for it to be a 10
square metre filter. The control box has been gutted.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3113</TD><TD CLASS='tablecell' VALIGN='top'>Airmaster RJX 360/A/24-12 and RJX 420/A/28-12 reversejet
filters mounted on common supporting steelwork. Each filter has an under hopper and 250 mm diameter
discharge screw. In the two units there are 624 filter bags 125 mm diameter x 3250 mm long giving a total
filter area of 780 square metres. It has a Halifax MBI 124 fan with 110kw motor, acoustic enclosure,
ductwork and chimney. This filter combination will handle up 70,000 cubic metres per hour at an airspeed
of 1.5 metres per minute. The whole unit needs to be reconditioned.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 13500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3434</TD><TD CLASS='tablecell' VALIGN='top'>Reversejet filter (probably Airmaster) with fan and
explosion relief panel mounted on support frame with underhopper. It looks to have about 40 square metres
of filter area.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3542</TD><TD CLASS='tablecell' VALIGN='top'>DCE Dalamatic reversejet filter type DLM 2/2/10 with a
filter area of 40 square metres and an underhopper to take a screw discharger (not supplied). It has a
5.5kw fan and will handle 6000 cubic metres per hour with an airspeed of 2.5 metres per minute. Recently
fully refurbished and not used since. Will work with hammermill ref UCPE-3541.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3978</TD><TD CLASS='tablecell' VALIGN='top'>WAM bin top reversejet cartridge filter with stainless
steel cylindrical body. It has a hinged lid for cartridge extraction. There are 7 No Polypleat elements
giving a filter area of 24.5 square metres.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3979</TD><TD CLASS='tablecell' VALIGN='top'>WAM bin top reversejet cartridge filter with stainless
steel cylindrical body. It has a hinged lid for cartridge extraction. There are 7 No Polypleat elements
giving a filter area of 24.5 square metres. Controls have been removed.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4203</TD><TD CLASS='tablecell' VALIGN='top'>Duscovent reversejet dust collector on supporting
steelwork with triple underhoppers, 3 No rotary valves, horizontal U trough screw below valves and
inclined round case discharge screw. This unit has ladder and access platform. Includes a 110 kw
centrifugal fan in an enclosure and some ductwork. Has been operating outside. It has 360 bags each 3.0
metres long. Currently handling only 465 cubic metres per minute (16,400 cfm)
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 17000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4204</TD><TD CLASS='tablecell' VALIGN='top'>Duscovent reversejet dust collector on supporting
steelwork with two underhoppers and 2 No rotary valves with horizontal U trough discharge screw below.
This unit has ladder and access platform. Includes a 55 kw centrifugal fan in an enclosure and some
ductwork. Has been operating outside. It has 240 bags each 3.0 metres long. Currently handling only 385
cubic metres per minute (13,570 cfm)
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 14850</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1860</TD><TD CLASS='tablecell' VALIGN='top'>Airmaster 15M aspirated bag tip unit.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2765</TD><TD CLASS='tablecell' VALIGN='top'>DCE Auto Drytex lab size dust collector.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 75</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3008</TD><TD CLASS='tablecell' VALIGN='top'>DCE type STU150 bag tip unit with fan and acoustic hood
but no controller.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3009</TD><TD CLASS='tablecell' VALIGN='top'>DCE type UMA150H hopper top dust filter. Door missing, no
bags, no controller.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3399</TD><TD CLASS='tablecell' VALIGN='top'>Airmaster 15M dust filter with 0.75kw fan, no explosion
panel, no bucket.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3433</TD><TD CLASS='tablecell' VALIGN='top'>DCE type UMA 150H dust filter unit.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3607</TD><TD CLASS='tablecell' VALIGN='top'>DCE Unimaster type 252 dust collector with fan, dust
bucket, acoustic hood, explosion panel and controller.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 650</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3609</TD><TD CLASS='tablecell' VALIGN='top'>Airmaster 75M dust collector with two fans and three dust
buckets.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3642</TD><TD CLASS='tablecell' VALIGN='top'>DCE type UMA 154 G5 dust collector with 4 hp fan, dust
bucket, acoustic diffuser, explosion relief panel and controller.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 650</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3920</TD><TD CLASS='tablecell' VALIGN='top'>Airmaster 30M dust collector with 4.0 kw fan, acoustic
hood, explosion relief panel and controller. Has an underhopper with cut off slide but no bucket as it
filled a big bag.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950</TD></TR>
</TABLE><BR><BR>
<A NAME='electrical_equipment'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Electrical Equipment - Control Panels</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3577</TD><TD CLASS='tablecell' VALIGN='top'>Datastor control panel for 12 station volumetric blending
plant using belt feeders. The panel has an Allen & Bradley Panel View 1000 display and Videotrack system.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3754</TD><TD CLASS='tablecell' VALIGN='top'>Hi Bay lights 250 watts<I><b> (6 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3803</TD><TD CLASS='tablecell' VALIGN='top'>Thorn 400 watt 240 V MBF high bay lights.<I><b> (70
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 30<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3597</TD><TD CLASS='tablecell' VALIGN='top'>200 KVA generating set in acoustic enclosure. It is
Newage generator with a Cummins 6 cylinder turbo diesel power unit. It has done 5517 hours.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3598</TD><TD CLASS='tablecell' VALIGN='top'>Rolls Royce Petbow 250 KVA generating set on base with
controls but no enclosure. It has a RR straight eight turbo diesel engine with electric start and a self
exciting Petbow alternator. This unit is partly stripped for an engine rebuild. All the new spares are
included but it has to be reassembled.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4047</TD><TD CLASS='tablecell' VALIGN='top'>Thomas Ward generating set believed to be 50KVA. It has a
Perkins 6354 diesel power unit. Ser No 73/5608320.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4192</TD><TD CLASS='tablecell' VALIGN='top'>150 KVA generating set by F G Wilson comprising a Perkins
diesel with a Leroy Somer alternator in a super silent enclosure. It has auto start facility, has done
2000 hours and is in mint condition.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 9000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2234</TD><TD CLASS='tablecell' VALIGN='top'>1.1 kw hydraulic powerpack with oil tank, pressure switch
and two outlets.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3966</TD><TD CLASS='tablecell' VALIGN='top'>Endress & Hauser Nivocompact high level sensors type FTC
830 with 1.0 metre drop.<I><b> (6 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 75<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2221</TD><TD CLASS='tablecell' VALIGN='top'>Holroyd size WDU 10 double reduction gearbox. This is a
reconditioned 10" unit with a ratio of 502.25:1
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2222</TD><TD CLASS='tablecell' VALIGN='top'>Renold Holroyd 7/0-14/0 double reduction gearbox No
342273TR-11M with a ratioo of 983.3:1
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2223</TD><TD CLASS='tablecell' VALIGN='top'>Unused PIV Posired 1 reduction gearbox with Brook Hansen
direct coupled drive. The drive is 18.5 kw 975 rpm onto gearbox type KLC 280-11V Ser No 607-077 G1. Ratio
74.5272:1 giving an output speed of 13 rpm via a 140 mm diameter output shaft. This unit is 2.1 metres
long x 800 mm wide x 700 mm high.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2224</TD><TD CLASS='tablecell' VALIGN='top'>Reconditioned Carter Hydrostatic variable speed gearbox
No 14R/0295/6856 ratio 9.57:1
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2225</TD><TD CLASS='tablecell' VALIGN='top'>Reconditioned Carter Hydrostatic variable speed gearbox
Size MF/14 No F14R/0898/1071.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2226</TD><TD CLASS='tablecell' VALIGN='top'>Reconditioned Carter Hydrostatic variable speed gearbox
No 14/19550.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2227</TD><TD CLASS='tablecell' VALIGN='top'>Reconditioned Carter Hydrostatic variable speed gearbox
No CF14R/0983/4481.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2233</TD><TD CLASS='tablecell' VALIGN='top'>Unused Rossi Motoriduttori type MR1V 160U02A gearbox. The
6.0 kw flanged motor has been removed.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2238</TD><TD CLASS='tablecell' VALIGN='top'>Unused Fenner Rossi Motorduttori type 152G8256 gearbox
with 7.5 kw 1450 rpm direct drive and a ratio of 63.1:1
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2595</TD><TD CLASS='tablecell' VALIGN='top'>Unused Flender brake motor with gearbox for goods lift.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3393</TD><TD CLASS='tablecell' VALIGN='top'>Radicon 17" overdriven worm gear reduction gearbox with
22 kw motor, vee belt drive and 60:1 reduction. Output speed 15 rpm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3812</TD><TD CLASS='tablecell' VALIGN='top'>ABB 55kw x 1480 rpm motor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3829</TD><TD CLASS='tablecell' VALIGN='top'>GEC Alpak D160M foot mounted electric motor 11kw 2900
rpm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3830</TD><TD CLASS='tablecell' VALIGN='top'>ETR Martigny M132MA6 5.5 kw 950 rpm foot mounted motor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3831</TD><TD CLASS='tablecell' VALIGN='top'>ABB M2AA 180L4 foot mounted motor 22 kw 1470 rpm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3832</TD><TD CLASS='tablecell' VALIGN='top'>MGM flange mounted 2 speed brake motor suitable for a
weigher feeder. 0.55 kw 710 rpm and 2.2 kw 2800 rpm.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3833</TD><TD CLASS='tablecell' VALIGN='top'>Brook Crompton D180M foot mounted motor 22 kw 2920 rpm
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3835</TD><TD CLASS='tablecell' VALIGN='top'>Brook Crompton D250S foot mounted motor 55 kw 2955 rpm
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3836</TD><TD CLASS='tablecell' VALIGN='top'>GEC Alpak D250S foot mounted motor 55 kw 2955 rpm
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3837</TD><TD CLASS='tablecell' VALIGN='top'>ABB-Fenner flange mounted gearmotor 4.0 kw 120 rpm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3968</TD><TD CLASS='tablecell' VALIGN='top'>Fenner torque arm speed reducer size B 13:1 ratio.<I><b>
(3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3969</TD><TD CLASS='tablecell' VALIGN='top'>Fenner torque arm speed reducer size C. 6 No 13:1and 1 No
5:1 ratio.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 65<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3970</TD><TD CLASS='tablecell' VALIGN='top'>Fenner torque arm speed reducer size D. 2 No 5:1, 2 No
13:1 and 1 No 20:1 ratio.<I><b> (4 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 80<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3971</TD><TD CLASS='tablecell' VALIGN='top'>Fenner torque arm speed reducer size E. 2 x 13:1 ratio
and 1 x 5:1 ratio.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4104</TD><TD CLASS='tablecell' VALIGN='top'>Fenner torque arm speed reducer size F, 13:1 ratio.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 120</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4105</TD><TD CLASS='tablecell' VALIGN='top'>Fenner torque arm speed reducer, product code 116BD502
5:1 ratio.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4106</TD><TD CLASS='tablecell' VALIGN='top'>Fenner torque arm speed reducer, product code 116CD502
5:1 ratio.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2235</TD><TD CLASS='tablecell' VALIGN='top'>Rietschle 3.0 kw vacuum pump on stand, Ser No 1380
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 450</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2995</TD><TD CLASS='tablecell' VALIGN='top'>Busch vacuum pump type 630-218 with 15kw drive. Will move
371 cfm at 15 Torr Hg.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
</TABLE><BR><BR>
<A NAME='elevators'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Elevators - Belt & Bucket</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1667</TD><TD CLASS='tablecell' VALIGN='top'>Christy belt and bucket elevator 9.33 metres high with
230 mm wide buckets on 200 mm centres. The case is 350 mm wide inside so the elevator could take a wider
belt and buckets. The belt condition is OK.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2275</TD><TD CLASS='tablecell' VALIGN='top'>375 mm belt and bucket elevator 14.0 metres high with
mild steel case but stainless steel boot and buckets. The case is 580 mm wide inside but it only has 375
mm buckets in it. This elevator has been removed but it is still assembled apart from the drive which was
for mounting independantly of the elevator.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2524</TD><TD CLASS='tablecell' VALIGN='top'>Simon Barron type belt and bucket elevator 7.2 metres
high with 200 mm wide buckets.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2752</TD><TD CLASS='tablecell' VALIGN='top'>Stainless steel belt and bucket elevator 9.0 metres high
with 220 mm stainless steel buckets on 200 mm centres. The drive motor and outlet are missing.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2781</TD><TD CLASS='tablecell' VALIGN='top'>Carier elevator legging 457 mm x 457 mm x 1244 mm
long.<I><b> (4 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 40<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2882</TD><TD CLASS='tablecell' VALIGN='top'>Carier 9ST belt and bucket elevator 10.0 metres high.
Still in situ.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2915</TD><TD CLASS='tablecell' VALIGN='top'>300 mm belt and bucket elevator 9.0 metres high
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2918</TD><TD CLASS='tablecell' VALIGN='top'>Simon Barron type single leg belt and bucket elevator 9.0
metres high with 230 mm wide buckets. Boot sitting in water.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3001</TD><TD CLASS='tablecell' VALIGN='top'>300 mm wide belt and bucket elevator 17.7 metres high
with drive and explosion relief panels. Belt is average, buckets on 160 mm centres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3429</TD><TD CLASS='tablecell' VALIGN='top'>Carier 6ST belt and bucket elevator 3.7 metres high with
motor but no gearbox.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3430</TD><TD CLASS='tablecell' VALIGN='top'>Carier 6ST belt and bucket elevator 4.5 metres high.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3431</TD><TD CLASS='tablecell' VALIGN='top'>Carier 9ST belt and bucket elevator 12 .0 metres high.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3432</TD><TD CLASS='tablecell' VALIGN='top'>Carier 12ST belt and bucket elevator 12.0 metres high.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3517</TD><TD CLASS='tablecell' VALIGN='top'>Rutherford double leg belt and bucket elevator 12 metres
high with painted steel case and 2 x 200 mm wide buckets to give up to 2 x 40 tph on dry grain.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3594</TD><TD CLASS='tablecell' VALIGN='top'>Carier 6ST belt and bucket elevator 9.0 metres high.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 900</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3730</TD><TD CLASS='tablecell' VALIGN='top'>Rand 100 mm belt and bucket elevator with seed boot and
painted case 13.0 metres high. Buckets are 100 mm wide on 90 mm centres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3739</TD><TD CLASS='tablecell' VALIGN='top'>Large quantity of pressed steel and fabricated steel
elevator buckets, various widths and various profiles, all with prepunched holes.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> - </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3752</TD><TD CLASS='tablecell' VALIGN='top'>Carier 9STD double leg elevator head, old type with paint
finish and motor but no gearbox.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3757</TD><TD CLASS='tablecell' VALIGN='top'>Carier 9ST belt and bucket elevator head only with paint
finish.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3758</TD><TD CLASS='tablecell' VALIGN='top'>Roll of canvas elevator belt with 9" buckets at 4"
centres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3866</TD><TD CLASS='tablecell' VALIGN='top'>Simplex 150 mm belt and bucket elevator 6.85 metres high
with drive and buckets on 150 mm centres. Rated at up to 20 tph on grain.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 550</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3884</TD><TD CLASS='tablecell' VALIGN='top'>Carier 9STD double leg elevator 7.16 metres high with
drive but no belt or buckets.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3885</TD><TD CLASS='tablecell' VALIGN='top'>Carier 6STD double leg belt and bucket elevator 9.14
metres high with 150 mm buckets on 150 mm centres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3906</TD><TD CLASS='tablecell' VALIGN='top'>Roll of belt with 230 mm wide buckets on it at 150 mm
pitch. Look like Carier.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3907</TD><TD CLASS='tablecell' VALIGN='top'>Roll of belt with 150 mm wide buckets on it at 130 mm
pitch. The buckets project 120 mm and are 90 mm deep at the back. Not Carier.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3983</TD><TD CLASS='tablecell' VALIGN='top'>Unused 200 mm wide elevator buckets 150 mm deep at back,
100 mm deep at front, 140 mm projection, recessed holes 130 mm apart 45 mm down from lip.<I><b> (100
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3985</TD><TD CLASS='tablecell' VALIGN='top'>Unused 230 mm wide 4 ply Nitrile elevator belt prepunched
with two holes on 200 mm pitch and 125 mm centres across belt width. Can be repunched to suit. About 32
metres on roll. Price œ10.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 320</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3986</TD><TD CLASS='tablecell' VALIGN='top'>Unused 230 mm wide 4 ply Nitrile elevator belt prepunched
with two holes on 200 mm pitch and 125 mm centres across belt width. Can be repunched to suit. About 20
metres on roll. Price œ10.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3987</TD><TD CLASS='tablecell' VALIGN='top'>Unused 230 mm wide 4 ply Nitrile elevator belt prepunched
with two holes on 115 mm pitch and 100 mm centres across belt width. Can be repunched to suit. About 30
metres on roll. Price œ10.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3988</TD><TD CLASS='tablecell' VALIGN='top'>Roll of unused Dawson Supertensile elevator belt 230 mm
wide x about 26 metres long. The belt is punched with two holes on 125 mm pitch and 125 centres across the
belt. Can be repunched to suit. Price œ10.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 260</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3989</TD><TD CLASS='tablecell' VALIGN='top'>Roll of unused elevator belt, believed to be Nitrile, 240
mm wide x about 23 metres long. The belt is punched with three holes on 265 mm pitch and 120 mm + 120 mm
centres across the belt. Can be repunched to suit. Price œ10.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 230</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3990</TD><TD CLASS='tablecell' VALIGN='top'>Roll of unused 4 ply Nitrile elevator belt 325 mm wide x
about 32 metres long. The belt is punched with three holes on 200 mm pitch and 120 mm + 120 mm centres
across the belt. Can be repunched to suit. Price œ14.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 448</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3991</TD><TD CLASS='tablecell' VALIGN='top'>Roll of unused 4 ply Nitrile elevator belt 320 mm wide x
about 25 metres long. The belt is punched with four holes on 130 mm pitch and 50 mm + 100 mm + 50 mm
centres across the belt. Can be repunched to suit. Price œ14.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3997</TD><TD CLASS='tablecell' VALIGN='top'>Unused Carier 230 mm wide elevator buckets with two
recessed holes.<I><b> (25 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 8<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4046</TD><TD CLASS='tablecell' VALIGN='top'>Carier 9STD double leg elevator head, old type with paint
finish and T/A gearbox but no motor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4056</TD><TD CLASS='tablecell' VALIGN='top'>Box of 200 new elevator bucket bolts with nuts and
washers.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 60</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4057</TD><TD CLASS='tablecell' VALIGN='top'>Used 230 mm wide 4 ply Nitrile elevator belt prepunched
with two holes on 125 mm pitch and 130 mm centres across belt width. Can be repunched to suit. About 27
metres on roll. Price œ5.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 135</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4058</TD><TD CLASS='tablecell' VALIGN='top'>Unused 230 mm wide 4 ply Nitrile elevator belt prepunched
with two holes on 190 mm pitch and 130 mm centres across belt width. Can be repunched to suit. About 20
metres on roll. Price œ10.00 per metre.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4061</TD><TD CLASS='tablecell' VALIGN='top'>Carier 9HOD double leg elevator 12.0 metres high with
painted case. It has 230 mm wide buckets on 150 mm centres and a 5.5 kw drive.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4062</TD><TD CLASS='tablecell' VALIGN='top'>Law Denis belt and bucket elevator 15.2 metres high with
painted case. The elevator has bottomless buckets 180 mm wide on 75 mm centres. It has a 7.5 kw drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4114</TD><TD CLASS='tablecell' VALIGN='top'>Carier 6STD double leg elevator 18.29 metres high with
painted case.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3973</TD><TD CLASS='tablecell' VALIGN='top'>Unused stainless steel cable with plastic disks to suit
cable and disk elevator. The disks are 100 mm diameter on 250 mm centres. Approx 25 metres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4111</TD><TD CLASS='tablecell' VALIGN='top'>Russell R90 mobile chevron belt elevator with
undercarriage, pneumatic tyres, receiving hopper and hydraulic lift and lower. The belt is 480 mm wide x
8.23 Metres long with a flat belt extension 1.83 metres long. The main belt is driven by a 2.2 kw single
phase motor. Believed to have an output up to 30 tph on cereals. Serial number 850727.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4161</TD><TD CLASS='tablecell' VALIGN='top'>Fyson mobile belt elevator with 440 mm wide chevron belt
8.53 metres long with 2.75 metre long swinger on the end. It has a thrre phase drive and 2.75 metre wide x
1.0 metre deep receiving hopper for lorry tipping.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4162</TD><TD CLASS='tablecell' VALIGN='top'>Fyson mobile belt elevator for transferring grain from a
lorry tail chute to the boot of an elevator. It has a 500 mm wide chevron belt 3.7 metres long and a
0.75kw three phase drive. The elevator has a 1200 mm x 700 mm receiving hopper and a discharge height of
1.6 metres. Functional but not very pretty.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1850</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4163</TD><TD CLASS='tablecell' VALIGN='top'>Prelude lorry tipping chevron belt elevator rated at 50
tph on dry wheat. It has a 2.8 metre wide receiving hopper, a 600 mm wide belt 5.3 metres long and a
discharge height of 2.0 metres. The belt is covered and there is a cover for the hopper. It has caster
wheels and adjustable height.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4164</TD><TD CLASS='tablecell' VALIGN='top'>Prelude lorry tipping chevron belt elevator rated at 50
tph on dry wheat. It has a 2.8 metre wide receiving hopper, a 600 mm wide belt 4.4 metres long and a
discharge height of 1.6 metres. It has pneumatic tyres and a drawbar.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4165</TD><TD CLASS='tablecell' VALIGN='top'>Prelude lorry tipping chevron belt elevator machine
number PR8549A. It has a 770 mm x 560 mm receiving hopper and a 400 mm wide belt 6.7 metres long. It has
two wheels and adjustable height.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4208</TD><TD CLASS='tablecell' VALIGN='top'>Downs Moonraker mobile chevron belt elevator on wheeled
chassis with towbar and pnuematic tyres. Extends out to 17.5 metres and has auto slew right and left with
delay for filling corners. Rated at up to 60 tph on grain. Full electro hydraulic power unit and remote
controls.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 6650</TD></TR>
</TABLE><BR><BR>
<A NAME='extrusion_equipment'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Extrusion Equipment - Extruder Conditioner</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2994</TD><TD CLASS='tablecell' VALIGN='top'>Stainless steel extruder conditioner 300 mm diameter x
1.2 metres long. No drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3022</TD><TD CLASS='tablecell' VALIGN='top'>Stainless steel extruder conditioner 400 mm diameter x
1.5 metres long with drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3000</TD><TD CLASS='tablecell' VALIGN='top'>Wenger X25 extruder base with splined shaft, screw,
pulley, a crate of sundry parts and 75kw motor only.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
</TABLE><BR><BR>
<A NAME='fans'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Fans - Axial</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2791</TD><TD CLASS='tablecell' VALIGN='top'>600 mm diameter bifurcated axial fan 790 mm long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2902</TD><TD CLASS='tablecell' VALIGN='top'>480 mm diameter bifurcated axial fan 785 mm long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3514</TD><TD CLASS='tablecell' VALIGN='top'>In line air heater with a Woods single stage axial fan
750 mm diameter with 4.0 kw 1490 rpm motor connected to an oil fired furnace via an air guide section. The
whole unit is 3.1 metres long x 800 mm overall diameter. The furnace has a Nu-Way L13 diesel burner
fitted. There is a control panel for controlling four units for drying malt. The panel can be included if
all four fans are purchased together.<I><b> (4 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 900<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3515</TD><TD CLASS='tablecell' VALIGN='top'>In line air heater with a Woods single stage axial fan
750 mm diameter with 4.0 kw 1490 rpm motor connected to an oil fired furnace via an air guide section. The
whole unit is 3.1 metres long x 800 mm overall diameter. The furnace has a Nu-Way L13 diesel burner
fitted. There is a control panel for controlling four units for drying malt. The panel can be included if
all four fans are purchased together. This set of four fans is older than UCPE-3514 and not in such good
condition.<I><b> (4 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3867</TD><TD CLASS='tablecell' VALIGN='top'>Axial fan by G W Axial. 760 mm diameter 720 rpm about
0.75kw.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3876</TD><TD CLASS='tablecell' VALIGN='top'>Lister MEU diesel powered grain drying fan with an
enclosure on a towable chassis. It has a 1060 mm diameter axial fan coupled to a four cylinder Lister
diesel power unit.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 650</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2219</TD><TD CLASS='tablecell' VALIGN='top'>Stling type M10 630 high pressure centrifugal fan with
630 mm diameter impellor and 3.0 kw 2870 rpm direct drive. The fan has a 140 mm diameter inlet with a
filter on it and a 100 mm diameter outlet. Built 1982.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2239</TD><TD CLASS='tablecell' VALIGN='top'>A & N centrifugal fan type MBE8-360 with lagged case and
15 kw 2915 rpm direct drive. This fan has a 650 mm diameter impellor, 360 mm diameter inlet and downward
facing outlet.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2872</TD><TD CLASS='tablecell' VALIGN='top'>Halifax Fan Company high pressure fan type 24CN7RE. This
is 600 mm diameter with 200 mm diameter inlet and outlet and an 11 kw 2950 rpm direct drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3234</TD><TD CLASS='tablecell' VALIGN='top'>Centrifugal grain drying fan, thought to be by Simplex,
with 45 hp motor and starter but no heaters. Could be 25 years old.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3595</TD><TD CLASS='tablecell' VALIGN='top'>Halifax Fan model Beaufort 30 centrifugal fan in
stainless steel with 37kw drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3846</TD><TD CLASS='tablecell' VALIGN='top'>Fan Systems centrifugal fan with upward facing outlet and
base with motor but no vee belts or guard. The fan has 230 mm x 305 mm outlet, 600 mm diameter impellor
and 15 kw drive. Impellor speed 2044 rpm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 600</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3868</TD><TD CLASS='tablecell' VALIGN='top'>Typhoon ventilation fan type PFIF with 2.2 kw motor,
starter and wheels.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3869</TD><TD CLASS='tablecell' VALIGN='top'>Cornercroft 4kw 2820 rpm ventilation fan with some 300 mm
dia perforated ventilation pipes.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 425</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3870</TD><TD CLASS='tablecell' VALIGN='top'>Ventilation fan with wheels and 2.2 kw 2850 rpm motor. A
bit rusty.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4086</TD><TD CLASS='tablecell' VALIGN='top'>Royfanco 4 kw direct driven centrifugal fan.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4087</TD><TD CLASS='tablecell' VALIGN='top'>Swiss Combi centrifugal fan set up for belt drive but has
no motor. Can take up to 45 kw and will deliver 15,000 cubic metres of air per hour.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
</TABLE><BR><BR>
<A NAME='feeders'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Feeders - Screw</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2814</TD><TD CLASS='tablecell' VALIGN='top'>Twin feeder with full feed and trickle feed suitable for
metering batches or feeding a weigher. The unit comprises a receiving hopper with agitator a 170 mm and 60
mm diameter screws and two motors. The unit is 1100 mm long.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2815</TD><TD CLASS='tablecell' VALIGN='top'>Wallace and Tiernan variable speed screw feeder with
controls.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2909</TD><TD CLASS='tablecell' VALIGN='top'>Screw feeder with 115 mm diameter screw and variable
speed drive. The variable speed drive needs an external controller.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2910</TD><TD CLASS='tablecell' VALIGN='top'>Screw feeder with receiving hopper, Carter hydrostatic
variable speed drive, Invicta vibrator to keep the screw full and a 25 mm diameter centreless screw.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3814</TD><TD CLASS='tablecell' VALIGN='top'>200 mm diameter x 1.84 metre long round case screw feeder
with 680 mm long x 350 mm wide inlet and underslung tail drive. This was probably a two speed feeder for
a weigher as the motor can be switched to high or low speed.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3815</TD><TD CLASS='tablecell' VALIGN='top'>150 mm diameter x 1.68 metre long round case screw feeder
with 880 mm long x 250 mm wide inlet and underslung tail drive. The drive has a mechanical speed
variator.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4140</TD><TD CLASS='tablecell' VALIGN='top'>Skako tray feeder 400 mm wide x 2.2 metres long with
drive, support frame, coil spring mountings and variable speed control.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1650<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='flaking_plant'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Flaking Plant - Cereal Cooker</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3388</TD><TD CLASS='tablecell' VALIGN='top'>A P V Mitchell indirect gas fired dryer/toaster with
cooler. This is a rotary drum type machine with stainless steel drum, suitable for products for human
consumption.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 10500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3913</TD><TD CLASS='tablecell' VALIGN='top'>Flake cooler to fit below micronizer. Two deck cooler 500
mm wide x 4000 mm long x 710 mm high. There is no fan with this machine. Will probably cool about 500kg
per hour of micronized flakes.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
</TABLE><BR><BR>
<A NAME='floor_sweeper'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Floor Sweeper - Forklift Mounted</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4150</TD><TD CLASS='tablecell' VALIGN='top'>Eastern RS 220 fork lift mounted hydraulic powered floor
sweeper. This machine is 2200 mm wide and was built in 2002. The two jockey wheels need repair or
replacement.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
</TABLE><BR><BR>
<A NAME='flour_milling_equipment'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Flour Milling Equipment - Complete Small Flour
Mills</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3857</TD><TD CLASS='tablecell' VALIGN='top'>Complete small flour mill based on Buhler equipment and
including two roller mills a stone mill, sifters, bagging equipment etc. This plant will produce up to 1
tph of good quality white flour.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3834</TD><TD CLASS='tablecell' VALIGN='top'>Brook Crompton D160MAD 11 kw 2930 rpm for flange
mounting. This has a drive coupling and is believed to be a spare drive for a Satake SEDC110A infestation
destroyer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3838</TD><TD CLASS='tablecell' VALIGN='top'>Satake Infestation Destroyer believed to be a type
SEDC110A with a throughput of 9 tph. It has an 11 kw 2930 rpm direct drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
</TABLE><BR><BR>
<A NAME='grain_cleaning_and_dressing'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Grain Cleaning & Dressing - Aspirating Cleaners</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4075</TD><TD CLASS='tablecell' VALIGN='top'>Carier galvanised aspirating grain cleaner for fitting on
the head of a belt and bucket elevator. Comes with a 0.75 kw fan and some ducting.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 600</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3191</TD><TD CLASS='tablecell' VALIGN='top'>Unused Westrup SAC-1000 cleaner screens with 2.0 mm round
holes.<I><b> (4 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3746</TD><TD CLASS='tablecell' VALIGN='top'>Lainchbury 30 x 8 deawner with inline drive, starter and
ammeter. The deawner is 200 mm diameter x 7602 mm long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3071</TD><TD CLASS='tablecell' VALIGN='top'>Buhler MTSA 100 flotation destoner. Approx 9.0 tph on
soft wheat.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3863</TD><TD CLASS='tablecell' VALIGN='top'>Crown DS10 air flotation destoner with hood rated at up
to 6 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3198</TD><TD CLASS='tablecell' VALIGN='top'>Crown gravity separator type GS6, late 90's vintage. It
is right hand configuration and has a 5.5 kw fan with inverter, 1.1 kw deck drive with inverter and a 1.1
kw hydraulic power pack. The deck is 16 mesh which is suitable for cereals up to maximum capacity of 6
tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 10000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3385</TD><TD CLASS='tablecell' VALIGN='top'>Buhler MTLC 150 air flotation gravity table. It requires
an airflow of 110 cubic metres per minute at 90 mm water guage. It will separate into three fractions at
up to 3 tph. Windows need refitting.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3544</TD><TD CLASS='tablecell' VALIGN='top'>Schmidt-Seeger I over I set of indent cylinders. It is an
MCK Ultratrieur UTR 790 over UTL 730 and the cylinders are 3.0 metres long. It has individual cylinder
drives, full enclosure and dust extracton points. It was built in 1999 but it does not appear to have
ever been used. The covers are 4.5 over 11.0 and it was set up for processing wheat at 8.5 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1082</TD><TD CLASS='tablecell' VALIGN='top'>Murphy Mist-O-Matic liquid dresser with 5 No pumps,
powder applicator, 300 mm dia x 2.44 metre long mixing screw and slug pellet dispensing unit. There are 2
No diaphragm pumps, 2 No Watson Marlow 603S peristaltic pumps and a Watson Marlow 504U peristaltic pump.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1097</TD><TD CLASS='tablecell' VALIGN='top'>Mixing screw for liquid dresser 300 mm dia x 2.13 metres
long with drive, crescent blades and drop bottom.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2246</TD><TD CLASS='tablecell' VALIGN='top'>Turner Pioneer 10 spinning disc liquid seed treater with
1 No Watson Marlow peristaltic pumps and 2 No diaphragm pumps. This is a continuous flow machine with a
capacity up to 10 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1900</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2755</TD><TD CLASS='tablecell' VALIGN='top'>Uniroyal Maxtron Selector chemical seed treater with
mixing screw, two peristaltic pumps, controls and support stand.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3026</TD><TD CLASS='tablecell' VALIGN='top'>Twin Vanguard liquid dresser with weigher and controls
but no pumps. Batch weighment up to 65kg, power 16kw and output up to 30 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3030</TD><TD CLASS='tablecell' VALIGN='top'>Mixing screw for liquid dresser 400 mm diameter x 2000 mm
long with drop bottom and drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3461</TD><TD CLASS='tablecell' VALIGN='top'>Bank of five diaphragm pumps on framework. The pumps are
Adony model AHA32-PCF-HW to deliver up to 1.8 litres per min at a pressure of 10 kg per square cm. Drives
are 0.33 hp single phase 240 volt.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1510</TD><TD CLASS='tablecell' VALIGN='top'>Mobile cleaning plant on an A reg Bedford TL chassis
comprising a Law Denis cyclone aspirator, deawner, a Law Denis type 503 rotary drum cleaner with three
sections, adjustable height and variable speed drive. The system has discharge conveyors, full electrics
and a selection of screens.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 18000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3705</TD><TD CLASS='tablecell' VALIGN='top'>Mobile seed cleaning and dressing plant mounted on a C
registered Ford Cargo lorry with curtain sides. It has a deawner, a Law Denis A350 rotary drum cleaner
with an aspiration unit and cyclone, two elevators, portable augers for screenings discharge, a GS16T
continuous liquid dresser with four Bran and Luebbe pumps, a bag weigher for weighments up to 50kg and a
bulk discharge conveyor. The main machines are believed to be 1994 vintage. The output is up to 15 tph as
a precleaner and up to 10 tph when dressing. There are a number of screens to suit cereals and OSR. The
machines are suitable for a three phase 415 V electric supply and the plant would be connected to a local
supply when working or to a generating set. There is a 37.5 KVA Perkins/Sykes generating set available at
an extra cost of œ2,000. The mobile cleaner is not for sale in the UK.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 25000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2757</TD><TD CLASS='tablecell' VALIGN='top'>Agria Max petrol mower with 1240 mm reciprocating cutter
bar for trial plot cutting.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3038</TD><TD CLASS='tablecell' VALIGN='top'>Rutherford 15/30 grain cleaner with aspiration unit and
exhaust ducting. It has a 4.0kw motor and is mounted on a steel support frame. Could be 20 years old.
There are a number of spare screens with it.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3194</TD><TD CLASS='tablecell' VALIGN='top'>Turner No 4 grain cleaner with drive but no screens or
cyclone.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3655</TD><TD CLASS='tablecell' VALIGN='top'>Kamas/Westrup UB600 fine cleaner with scalper screen and
single cleaning deck. It has an aspirating fan and cyclone and some spare screens. It was fine cleaning
bird seed and has a throughput around 1 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3795</TD><TD CLASS='tablecell' VALIGN='top'>Clark and Sutherland grain cleaner with feed roll, quad
aspiration, steel frame and wooden body. It has two decks, ball cleaning screens and an air manifold. Up
to 60 tph precleaning, 30 tph dressing. Some spare screens with it.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4121</TD><TD CLASS='tablecell' VALIGN='top'>Boswell sieve cleaner with aspiration, on stand with some
screens. Capacity believed to be up to 15 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
</TABLE><BR><BR>
<A NAME='grain_driers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Grain Driers - Batch</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1087</TD><TD CLASS='tablecell' VALIGN='top'>Wilder Robomatic grain drier type WGD 70 1121 AT with
diesel burner and controls. Believed to be 1975 vintage.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3593</TD><TD CLASS='tablecell' VALIGN='top'>Wilder Robomatic 90 batch drier in good order with
controls.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4142</TD><TD CLASS='tablecell' VALIGN='top'>Wilder Robomatic 70S batch dryer with diesel burner.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3993</TD><TD CLASS='tablecell' VALIGN='top'>Complete grain drying plant comprising a Law 12 tph
single column mixed flow continuous dryer with new control panel, a cyclone type aspirating precleaner,
two Carier belt and bucket elevators and a chain and flight conveyor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 9000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2785</TD><TD CLASS='tablecell' VALIGN='top'>Alvan Blanch 208 Cascade continuous flow grain dryer
about 30 years old. Capacity about 10tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3185</TD><TD CLASS='tablecell' VALIGN='top'>MFM 6 tph continuous flow grain dryer with galvanised
body and diesel fired burner. 1990s vintage.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3693</TD><TD CLASS='tablecell' VALIGN='top'>Alvan Blanch DF10/13A continuous flow grain cooler built
in 1982. This is based on a double flow grain dryer but has only one fan and no heat source. It was built
to cool grain from a rotary drum grain dryer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3883</TD><TD CLASS='tablecell' VALIGN='top'>Selectos diesel burner model D82 PTN. Suitable for a
grain dryer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3992</TD><TD CLASS='tablecell' VALIGN='top'>Alvan Blanch Cascade continuous flow grain dryer. This is
a 1978 machine rated at 10.25 tph. It is diesel fired and has a drying fan that is about 37 kw and a
cooling fan that is about 15 kw. The dryer is 11.0 metres long x 3.8 metres wide x 2.0 metres high at the
outlet end and 5.5 metres at the inlet end. Could be converted to dry other products.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4034</TD><TD CLASS='tablecell' VALIGN='top'>Alvan Blanch DF115 continuous flow grain dryer with
diesel burner. Rated at about 5 tph. Believed 1979 vintage. Sensible offers considered around :-
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4117</TD><TD CLASS='tablecell' VALIGN='top'>Bentall MFM diesel fired continuous flow grain dryer
rated at up to 10 tph. Good condition.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4118</TD><TD CLASS='tablecell' VALIGN='top'>Bentall ICV 240 continuous flow grain dryer rated at up
to 12 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4119</TD><TD CLASS='tablecell' VALIGN='top'>Bentall MFM diesel fired continuous flow grain dryer
rated at up to 14 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4120</TD><TD CLASS='tablecell' VALIGN='top'>Law 12.5 tph continuous flow grain dryer with new control
panel.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4211</TD><TD CLASS='tablecell' VALIGN='top'>Alvan Blanch Cascade continuous flow grain dryer. This is
rated at 10.25 tph. It is diesel fired and engine driven as no three phase supply is available. The dryer
is 11.0 metres long x 3.8 metres wide x 2.0 metres high at the outlet end and 5.5 metres at the inlet
end. Could be converted to dry other products.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4212</TD><TD CLASS='tablecell' VALIGN='top'>Allmet diesel fired chain and slat type dryer with wide
body. Rated at up to 6.5 tph. Believed to be about 1968 vintage but in good order.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4213</TD><TD CLASS='tablecell' VALIGN='top'>Allmet mixed flow dryer rated at up to 11.5 tph. Modern
dryer with diesel burner and galvanised case. Believed to have been built around 1986. Recently had major
burner overhaul.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7500</TD></TR>
</TABLE><BR><BR>
<A NAME='intake_system'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Intake System - Intake System</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3738</TD><TD CLASS='tablecell' VALIGN='top'>Steel intake hopper with supporting legs and variable
speed discharge belt. The hopper is 2.6 metres long x 2.1 metres wide x 1.0 metres high. The belt is 450
mm wide and is the same length as the hopper. The belt needs repair or replacing.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4071</TD><TD CLASS='tablecell' VALIGN='top'>Carier double trench intake with drive over grid. This
comprises two intake hoppers 3.0 metres long x 600 mm wide x 600 mm deep both on one Carier 8/40 chain and
flight conveyor with one head and one tail section. This could be made into two separate 40 tph intakes
by adding a head and tail section.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
</TABLE><BR><BR>
<A NAME='kibbler/nibbler'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Kibbler/Nibbler - Serrated Basket</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3077</TD><TD CLASS='tablecell' VALIGN='top'>Powtek 300 x 450 Nibbler in mild steel with 2.5-3.0mm
basket. Basket frame is damaged.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3394</TD><TD CLASS='tablecell' VALIGN='top'>300 mm wide toothed kibbler with two 150 mm diameter
rolls working against adjustable toothed plates. Complete with drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
</TABLE><BR><BR>
<A NAME='laboratory_equipment'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Laboratory Equipment - Laboratory Equipment</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1496</TD><TD CLASS='tablecell' VALIGN='top'>Eurotherm oven with metal pans. Little used.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2345</TD><TD CLASS='tablecell' VALIGN='top'>Kjeltec 1030 Autoanalyzer with digestion heater blocks,
tubes etc for measuring Nitrogen content.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2346</TD><TD CLASS='tablecell' VALIGN='top'>Glasblaserei sieve shaker with sieve boxes and 1.80,
2.00, 2.25, 2.50 & 2.80 mm meshes.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2347</TD><TD CLASS='tablecell' VALIGN='top'>Glasblaserei portable 1 litre chondrometer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2348</TD><TD CLASS='tablecell' VALIGN='top'>Avery 1 litre chondrometer and scales.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2349</TD><TD CLASS='tablecell' VALIGN='top'>Carbolite CSF 1000 ashing furnace.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2350</TD><TD CLASS='tablecell' VALIGN='top'>Sample divider.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2351</TD><TD CLASS='tablecell' VALIGN='top'>Gallenkamp OV 160 oven for accurate moisture content
measurement.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2352</TD><TD CLASS='tablecell' VALIGN='top'>Sartorious 1265 MP top pan balance.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2353</TD><TD CLASS='tablecell' VALIGN='top'>Sartorious L420S top pan balance.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2354</TD><TD CLASS='tablecell' VALIGN='top'>Mettler PN323 top pan balance.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2355</TD><TD CLASS='tablecell' VALIGN='top'>Temperature controlled cabinets.<I><b> (2
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2356</TD><TD CLASS='tablecell' VALIGN='top'>Dickey-John GAC 2000 moisture tester with printer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2357</TD><TD CLASS='tablecell' VALIGN='top'>Sundry dessicators, probe traps,water bath etc.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2389</TD><TD CLASS='tablecell' VALIGN='top'>Bran and Luebbe model IR500 infralyzer, Serial Number
9618626 new in 1996. This is a near infra red reflectance analyzer which will test for protein, oil, ash,
fibre, starch and moisture.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 10000</TD></TR>
</TABLE><BR><BR>
<A NAME='liquids_handling'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Liquids Handling - Liquids Weigher</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1532</TD><TD CLASS='tablecell' VALIGN='top'>Molasses weighing system with two pumps, pipework,
rectangular main molasses storage tank, small loadcell mounted weighing vessel and pneumatic control
valves.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1533</TD><TD CLASS='tablecell' VALIGN='top'>Oil inclusion system including, pump, pipework and
valves.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2236</TD><TD CLASS='tablecell' VALIGN='top'>Unused Flowserve pump model 16WMV8 Ser No 440093-0010-01
with 7.5 kw 2900 rpm direct drive. Built 2002. This pump can be used for industrial pressure washing and
has a flow rate of 10 cubic metres per hour at 12 bar pressure.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2237</TD><TD CLASS='tablecell' VALIGN='top'>Bare shaft Monopump type GD 70B3/X.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2951</TD><TD CLASS='tablecell' VALIGN='top'>OBL variable speed diaphragm pump type MB75A with 15 mm
ports.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2952</TD><TD CLASS='tablecell' VALIGN='top'>Netzsch type Nemo NM021BY02S12B screw pump built 2003
with 30 mm ports.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3200</TD><TD CLASS='tablecell' VALIGN='top'>Grundfos high volume water pump with 150 mm inlet and
outlet and 2 No 7.5 kw 1450 rpm motors. Model YPCDM150/242/7.5A/F/B/BAOE Nr 5063.32/1. Output 140 cubic
metres per hour at 13 metres head.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1350</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3439</TD><TD CLASS='tablecell' VALIGN='top'>Two Albany variable speed molasses pumps with molasses
day tank.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3603</TD><TD CLASS='tablecell' VALIGN='top'>Rectangular molasses tank 3.0 metres x 2.6 metres x 2.9
metres high with inlets, outlets, access ports etc. Working volume about 22 cubic metres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950</TD></TR>
</TABLE><BR><BR>
<A NAME='metal_detectors'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Metal Detectors - In Flow</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2550</TD><TD CLASS='tablecell' VALIGN='top'>Cintex Microsearch drop through metal detector in
stainless steel with 50 mm diameter entry port. This unit is for small flow and it will sense particles
down to 0.5 mm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3454</TD><TD CLASS='tablecell' VALIGN='top'>Lock Metalchek 30 CXE drop through metal detector in
stainles steel with sensor, ejector and controls. Duct is 150 mm diameter.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
</TABLE><BR><BR>
<A NAME='micronizers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Micronizers - Gas Fired</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2396</TD><TD CLASS='tablecell' VALIGN='top'>Micronizer built 1990s, gas fired, with cooler and Turner
18 x 36 roller mill. Flaking capacity about 1.25 tph. Not for sale in the UK.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 20000<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='mills'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Mills - Crushing Mills</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4205</TD><TD CLASS='tablecell' VALIGN='top'>Hunwick Lightning Magnum crushing mill Size 7. Fully
reconditioned but no drive or grids.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3089</TD><TD CLASS='tablecell' VALIGN='top'>Swiss Combi B1000 hammermill body and rotor. No beaters,
screens or drive. Requires 2 x 90kw motors.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3940</TD><TD CLASS='tablecell' VALIGN='top'>Christy Essex Major hammermill with 5.5kw drive.<I><b> (5
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4079</TD><TD CLASS='tablecell' VALIGN='top'>Centre feed hammermill possibly by Saeby with 7.5kw 2870
rpm direct drive, built in transportation fan and 100 mm diameter outlet. Output on dry wheat through a 3
mm screen up to 500kg per hour. Needs a suction head with stone trap for the inlet.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4100</TD><TD CLASS='tablecell' VALIGN='top'>Swiss Combi B1000 hammer mill with 2 x 90 kw motors but
no vee belts or drive guards.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4101</TD><TD CLASS='tablecell' VALIGN='top'>Swiss Combi B1000 body and rotor but no side plates.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4102</TD><TD CLASS='tablecell' VALIGN='top'>Swiss Combi B1200 hammermill body and rotor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4103</TD><TD CLASS='tablecell' VALIGN='top'>Selection of unused Swiss Combi B1000 hammers and screen
sections. Prices based on quantity.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4129</TD><TD CLASS='tablecell' VALIGN='top'>Robinson Multi Mill 2 with 200 kw direct drive, auto
screen change, baseplate with anti vibration mountings, magnet chute and feeder. Rotor is in average
condition.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 12000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4130</TD><TD CLASS='tablecell' VALIGN='top'>Robinson Multi Mill 2 with 250 kw direct drive, baseplate
with anti vibration mountings, magnet chute and feeder. Rotor is in good condition. There is an Airmaster
RJX 42 reversejet filter included with this hammermill with fan and open base. No underhopper.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 14500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4186</TD><TD CLASS='tablecell' VALIGN='top'>Simon Barron Multimill 2 on a base plate with 132kw
direct drive, twin screw feeder, magnet, control panel, some spare screens and a set of unused beaters.
The inlet is 711 mm wide. The hammermill is mounted on a support platform with access ladder but no
handrails. Below the platform there is an expansion hopper with a screw discharger but no rotary valve.
There is an Airmaster RJX42L78 reversejet filter on the platform aspirating the hammermill. All in good
order.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4188</TD><TD CLASS='tablecell' VALIGN='top'>Christy LB7 hammermill on base plate with 15kw belt
drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4194</TD><TD CLASS='tablecell' VALIGN='top'>Christy B7/2 hammermill on base plate with 7.5kw motor
and vee belt drive. There is a variable speed tray feeder some ductwork, cyclone and dust box with filter
bags. The motor is undersized for this hammermill which can take up to 30kw.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4038</TD><TD CLASS='tablecell' VALIGN='top'>Feedmobile mobile mill/mix plant on a Mercedes M
registered 1820 chassis. This unit has an output of up to 6 tph depending on the raw materials,
grinding/rolling spec etc. The plant comprises an intake conveyor for additives and a suction system for
bulk materials with a weghing unit to quantify the batch size. It has a nominal 1 tonne mixer on it and a
hammermill and a roller mill. There is a molasses addition system, additives storage container, molasses
tank and a diesel power unit. There will be restrictions on where this unit can be sold in the UK.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 27500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2786</TD><TD CLASS='tablecell' VALIGN='top'>Pin mill with 400 mm diameter contra rotating plates,
believed to be an Eastern European copy of an Alpine Contraplex. This machine requires two motors. There
are several spare disks and pins.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2801</TD><TD CLASS='tablecell' VALIGN='top'>Cormall KV plate mill with 260 mm diameter plates. There
is no motor.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3107</TD><TD CLASS='tablecell' VALIGN='top'>Christy & Norris 24 x 12 high top pulveriser, no bedplate
or drive but in good order.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3995</TD><TD CLASS='tablecell' VALIGN='top'>Christy 24 x 24 high top pulveriser fully refurbished but
less base and drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 8000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3996</TD><TD CLASS='tablecell' VALIGN='top'>Christy 24 x 12 high top pulveriser fully refurbished but
less base and drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4145</TD><TD CLASS='tablecell' VALIGN='top'>Christy and Norris 24 x 16 pulveriser on base with 45kw
drive and control panel. This is a fully refurbished machine with 12 month warranty.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 22000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4146</TD><TD CLASS='tablecell' VALIGN='top'>Christy and Norris 24 x 16 pulveriser on base with 110kw
drive and control panel. This is a fully refurbished machine with 12 month warranty.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 36900</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4198</TD><TD CLASS='tablecell' VALIGN='top'>Christy & Norris 24 x 24 pulveriser fully refurbished, no
base no drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 10000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4199</TD><TD CLASS='tablecell' VALIGN='top'>Christy & Norris 30 x 30 pulveriser on skid frame with
110 kw motor and vee belt drive. Fully reconditioned.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 22000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4200</TD><TD CLASS='tablecell' VALIGN='top'>Christy & Norris 24 x 12 high top pulveriser fully
refurbished, no base no drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3700</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4201</TD><TD CLASS='tablecell' VALIGN='top'>BJD 15 x 8 pulveriser on support frame with motor and vee
belt drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3700</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4206</TD><TD CLASS='tablecell' VALIGN='top'>Rota-Mill Series 600 pulveriser on bedplate with 37.5 kw
motor and vee belt drive. Done only 2 months work.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 16800</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3621</TD><TD CLASS='tablecell' VALIGN='top'>KEK H3 Universal Fine Grinder with 15kw motor. It has a
370 mm diameter rotor which rotates at 6000 rpm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2810</TD><TD CLASS='tablecell' VALIGN='top'>Baumeister Universal mill with 450 mm diameter x 170 mm
wide screen and 22kw motor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
</TABLE><BR><BR>
<A NAME='miscellaneous'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Miscellaneous - Miscellaneous</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2555</TD><TD CLASS='tablecell' VALIGN='top'>Morris 500kg electric chain block with 4.0 metre drop.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2594</TD><TD CLASS='tablecell' VALIGN='top'>Cake breaker 480 mm wide with 300 mm diameter rotor and
5.5 kw belt drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2798</TD><TD CLASS='tablecell' VALIGN='top'>Henry Simon grain measurer.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2799</TD><TD CLASS='tablecell' VALIGN='top'>Simon Sentry inline infestation destroyer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2843</TD><TD CLASS='tablecell' VALIGN='top'>Simon Entoleter with 3.5hp direct drive. Some damage to
drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2845</TD><TD CLASS='tablecell' VALIGN='top'>Bi directional roller conveyor sections for switching the
direction of travel of IBCs or pallets by 90 degrees. Operated by compressed air.<I><b> (4
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2880</TD><TD CLASS='tablecell' VALIGN='top'>Selectos SG82C gas burner.<I><b> (12 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2993</TD><TD CLASS='tablecell' VALIGN='top'>Black Heat 30/40 infra red overhead radiant gas heater
5.4 metres long.<I><b> (9 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2999</TD><TD CLASS='tablecell' VALIGN='top'>Black Heat 30/40 infra red overhead radiant gas heater
10.0 metres long.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 600<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3768</TD><TD CLASS='tablecell' VALIGN='top'>Galvanised stairs in approx 9 tread sections with
either durbar pattern or open mesh 800 mm wide treads and timber rest platforms. Ex Intervention Board and
built to a high standard.<I><b> (12 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 650<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4081</TD><TD CLASS='tablecell' VALIGN='top'>Section of painted steel walkway with handrails and
Expamet. It is 900 mm wide 5.6 metres long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4123</TD><TD CLASS='tablecell' VALIGN='top'>Simon Boxer 140 D cherry picker with Deutz diesel power
unit, 500 kg platform, 14 metre lift height and only 1395 hours on the clock. Needs test certificate.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2850</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4151</TD><TD CLASS='tablecell' VALIGN='top'>P & S Murray nominal 2T grain bucket with hydraulic tip
and new front wear blade. Needs repair to the mounting brackets.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
</TABLE><BR><BR>
<A NAME='mixers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Mixers - Chain & Slat</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2958</TD><TD CLASS='tablecell' VALIGN='top'>Fraser inclined chain and slat mixer with chain drive,
part open top, outlet with slide and intake hopper. Nominal 1 tonne coarse mix capacity.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3828</TD><TD CLASS='tablecell' VALIGN='top'>Stainless steel continuous mixer with pedestal mounted
bearings and tangential inlet and outlet. It has strips of stainless steel mixing blades bolted to the
centre shaft. It is 300 mm diameter x 2150 mm long and has no drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4147</TD><TD CLASS='tablecell' VALIGN='top'>Beken Continex C10 continuous mixer with 37kw drive. This
machine is ideal for mixing resins, pastes, starch, confectionery and pharmaceutical products. It has
twin 550 mm long intermeshing screws followed by 720 mm long mixing screws. The mixer is 4.0 metres long
x 1.0 metre wide x 1.5 metres high and weighs 1.5 tonnes. Price on application.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> - </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2856</TD><TD CLASS='tablecell' VALIGN='top'>Tatham paddle blade horizontal mixer in mild steel with a
working volume of 2000 litres and bomb door discharge.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 10000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4039</TD><TD CLASS='tablecell' VALIGN='top'>Tatham paddle blade horizontal mixer in stainless steel
with a working volume of 1500 litres and bomb door discharge.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1543</TD><TD CLASS='tablecell' VALIGN='top'>Christy Contimix ribbon blade mixer, nominal 2 tonne
capacity with 3 No discharge slides and top hopper with bomb door discharge. The mixer is in poor
condition but it has a good 30hp drive with 17" underdriven Radicon 60:1 gear box.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3104</TD><TD CLASS='tablecell' VALIGN='top'>Gardner 6.4 cubic metre twin ribbon mixer with 22kw
drive. The body is 2.5 metres wide x 2.3 metres long x 1.3 metres deep with 2 x 1.2 metre diameter ribbon
bladed rotors. The mixer has 6 No outlets three under each ribbon.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3397</TD><TD CLASS='tablecell' VALIGN='top'>Gardner Rapid horizontal U trough mixer with a 1.5 metre
wide x 3.35 metre long body and a single outlet. This mixer has a volume of about 6000 litres. The drive
is a slip ring motor onto a Croft reduction gearbox onto spur gears. The motor and gearbox are not mounted
on the mixer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3785</TD><TD CLASS='tablecell' VALIGN='top'>Simon Barron 4000 litre ribbon blade mixer with two
outlets and side mounted gearmotor with chain drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4153</TD><TD CLASS='tablecell' VALIGN='top'>10 cubic metre ribbon blade mixer on base frame with
Holroyd reduction gearbox and 30kw motor. There is a single central outlet hole in the base but no flange
or slide. Overall dimensions are 6400 mm long x 1700 mm wide x 3200 mm high. The outlet is 850 mm above
base level.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3440</TD><TD CLASS='tablecell' VALIGN='top'>Turner Heeson vertical square mixer with top mounted
drive and two electro pneumatic outlet slides. The mixerbody is 1.25 x 1.25 x 1.83 metres high and has a
working capacity of about 2 cubic metres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3875</TD><TD CLASS='tablecell' VALIGN='top'>Reffold nominal 1 tonne vertical mixer with 10 hp top
drive and two powered infeeds at the bottom. Infeeds were below floor level so legs are shorter. Mixer
working volume 2 cubic metres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3941</TD><TD CLASS='tablecell' VALIGN='top'>Reffold nominal 1 tonne vertical meal mixer on mechanical
weighing unit with powered infeed at the bottom.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 900</TD></TR>
</TABLE><BR><BR>
<A NAME='oil_extraction'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Oil Extraction - Oil Extraction Press</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3629</TD><TD CLASS='tablecell' VALIGN='top'>Double Elephant size 130 screw press. This machine is
made in China, is unused and requires a 15kw motor to drive it. It has a feed hopper with agitator and it
will do 250kg - 300 kg per hour cold pressing and up to 500 kg per hour hot pressing. Spares and service
available in UK.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 6000<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='packaging'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Packaging - Bag Clamps</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1458</TD><TD CLASS='tablecell' VALIGN='top'>Bag clamp with 300 mm x 178 mm eliptical mouth and hand
operated, rubber jaw overcentre clamp. Possibly made by Reed Medway.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1080</TD><TD CLASS='tablecell' VALIGN='top'>Fourways electro/hydraulic reversing bag conveyor on
wheeled undercarriage. This unit comprises a 530 mm wide wooden slatted conveyor 7.30 metres long on a
four wheelset centre unit with jacks and the control equipment. The centre unit is 2.00 metres high and
the front and rear conveyor sections can be raised and lowered hydraulically independently.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2119</TD><TD CLASS='tablecell' VALIGN='top'>Robson flat belt bag conveyor 600 mm wide x 3.5 metres
long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2120</TD><TD CLASS='tablecell' VALIGN='top'>Robson inclined bag conveyor 600 mm wide x 3.0 metres
long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1800</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2121</TD><TD CLASS='tablecell' VALIGN='top'>Medway inclined bag conveyor 600 mm x 2.0 metres long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2535</TD><TD CLASS='tablecell' VALIGN='top'>Ammeral powered 90 degree bend 660 mm wide with belt and
supporting frame.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 600</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2537</TD><TD CLASS='tablecell' VALIGN='top'>300 mm wide x 2.0 metre long powered roller track on
support frame.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2538</TD><TD CLASS='tablecell' VALIGN='top'>500 mm wide x 3.0 metre long powered roller track on
support frame.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2539</TD><TD CLASS='tablecell' VALIGN='top'>Powered 90 degree roller track bend 500 mm wide with
supporting frame.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2858</TD><TD CLASS='tablecell' VALIGN='top'>Portpack bag conveyor with stainless steel frame 3.6
metres long with 400 mm wide belt.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2932</TD><TD CLASS='tablecell' VALIGN='top'>3.3 metre long bag conveyor with approx 700 mm inclined
section and 600 mm wide grip face belt.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3357</TD><TD CLASS='tablecell' VALIGN='top'>300 mm light duty gravity roller track 2.38 metres long
with 30 mm diameter rollers. Excellent condition.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3529</TD><TD CLASS='tablecell' VALIGN='top'>Trolley and rails for moving bags vertically from
weigher.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4160</TD><TD CLASS='tablecell' VALIGN='top'>Pacepacker 600 mm wide x 1250 mm long belt on rollers
type bag conveyor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 175</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4042</TD><TD CLASS='tablecell' VALIGN='top'>CETEC EMF 400 open mouthed bag filler purchased in 1996
and fitted with a Fischbein tape over bag closing and stitching system. This unit will handle 260 mm wide
x 50 mm deep x 450 mm high or 350 mm wide x 145 mm deep x 735 mm high bags. There is a bag flattening
conveyor with this filler/closer and a 2001 Ishida DACS check weigher followed by a year 2000 Motoman
Robotic palletiser with pallet in-feed and exit roller track. It will take 1000 x 1200 pallets. To be
decommissioned April 2010.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 40000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4043</TD><TD CLASS='tablecell' VALIGN='top'>CETEC EMF 400 open mouthed bag filler purchased in 1992
and fitted with a Fischbein tape over bag closing and stitching system. This unit will handle 260 mm wide
x 50 mm deep x 450 mm high or 350 mm wide x 145 mm deep x 735 mm high bags.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 6500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2892</TD><TD CLASS='tablecell' VALIGN='top'>Chronos bag placer type DS 1 with control panel to handle
three different bag sizes. Overall dimensions 1200 mm x 1200 mm x 2500 mm high.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2998</TD><TD CLASS='tablecell' VALIGN='top'>Fawema type FA 35.2 high speed bag placer No 3554 built
in 1983. Was working on small pet food bags 2 - 4 kg. Capable of up to 80 bags per minute.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4028</TD><TD CLASS='tablecell' VALIGN='top'>Pacepacker C type bag placer No 1569 believed to have
been built in 2000. Good condition.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3900</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1040</TD><TD CLASS='tablecell' VALIGN='top'>Pallet truck
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2657</TD><TD CLASS='tablecell' VALIGN='top'>Barlow PT-20-45-2500-NSN-YW pallet truck with a capacity
2,500kg.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 75<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3040</TD><TD CLASS='tablecell' VALIGN='top'>Spiralwrap SR-03-06 automatic pallet wrapper with 1.59
metre diameter turntable and remote panel. 1.9 metre high mast. Suitable for Euro pallets, not 5' x 4'.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3776</TD><TD CLASS='tablecell' VALIGN='top'>Robopac Twist rotary arm stretch wrapper with top
sheeter. Work rate 20 - 25 pallets per hour. This machine was built in 2002 and was working as a stand
alone machine loaded and unloaded by fork truck so it has optical safety barriers. It could be converted
to fully automatic operation with powered roller track. It will work with 1200 x 1200, 1200 x 1000 and
1000 x 1000 pallets with stack height up to 2200 mm. It has Allen & Bradley PLC control and powered film
pre stretch.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 25000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2128</TD><TD CLASS='tablecell' VALIGN='top'>Morray pallet conveyor 1200 mm x 2.5 metres long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 700</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2394</TD><TD CLASS='tablecell' VALIGN='top'>Mollers high level palletiser built 1992 serial number
16413. Will do 1000 bags per hour and can be pre-programmed for 10 different layer patterns. This machine
comes complete with inclined feed conveyor, bag flattener, pallet magazine full pallet exit conveyor,
control panel and automatic lubrication system. Done little work and in excellent condition. Cost œ220,000
new.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 39500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3130</TD><TD CLASS='tablecell' VALIGN='top'>OCME low level palletiser to take 1200 mm x 1000 mm
pallets. This is a 1990 machine with new controls in 2001. It was decommissioned in 2005. It has a bag
flattener,empty pallet magazine and full pallet exit roller track.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 19000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3149</TD><TD CLASS='tablecell' VALIGN='top'>Chronos PL900 palletiser manufactured in 2002, capable of
900 bags per hour, retro-fitted with Fuji pick-up head, high level infeed, adjustable automatic pallet
magazine suitable for up to 1400mm x 1600mm, complete with 2 off infeed conveyors, 1 off bag flattener, 2
off full pallet take off conveyors, full safety barrier system with light guards.<I><b> (1
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 30000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3775</TD><TD CLASS='tablecell' VALIGN='top'>Mollers high level palletiser with bomb doors and
Kuchinski PLC control system. Believed mid 80s vintage. Will take 1200 mm x 1000 mm pallets and will stack
to 1900 mm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4027</TD><TD CLASS='tablecell' VALIGN='top'>FTH low level palletiser with pallet magazine and exit
roller track. Will take 1500 mm x 1250 mm pallets. Built 1990, will do up to 400 bags per hour. Has new
Siemens controls. In good order.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 6500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3911</TD><TD CLASS='tablecell' VALIGN='top'>Loveshaw Little David microjet printer model OPNII.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2361</TD><TD CLASS='tablecell' VALIGN='top'>Ishida-Driver multi head weigher model CCW-213RLC-WP-S
built in 1984, serial number 8928. It is a 14 head single discharge machine in stainless steel with feeder
troughs, pool hoppers and 5 litre weigh hoppers. It will weigh from 100 - 2720 gms and has an output of
up to 50 packs per minute.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2494</TD><TD CLASS='tablecell' VALIGN='top'>Atoma four head weighing unit to do 40 x 5kg weighments
per minute. This unit has a control package but no bagging equipment.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 12000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2985</TD><TD CLASS='tablecell' VALIGN='top'>Autopack 4 head weigher in stainless steel 3.0-6.0 kg. No
80/0943/369. Scale pans size 113B. Has a control panel with it. Rate around 40 packs per minute.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2997</TD><TD CLASS='tablecell' VALIGN='top'>Autopack 4 head weigher in stainless steel model
372FB-319C to weigh 5.0-5.5 kg. No 84/1653/319. Complete with hoppers and control panel. Rate around 40
packs per minute.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2105</TD><TD CLASS='tablecell' VALIGN='top'>Medway 150 pedestal mounted stitcher.<I><b> (2
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2107</TD><TD CLASS='tablecell' VALIGN='top'>Richard Simon pedestal mounted bag closer.<I><b> (2
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2108</TD><TD CLASS='tablecell' VALIGN='top'>Richard Simon on spout bag aligner built 2000. Could be
fitted to an existing bagging line to spread bag mouth prior to closure.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2109</TD><TD CLASS='tablecell' VALIGN='top'>Pacepacker ticket applicator.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2129</TD><TD CLASS='tablecell' VALIGN='top'>Fischbein model E hand stitcher.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2816</TD><TD CLASS='tablecell' VALIGN='top'>Medway adjustable pedestal with tape feeder, stitcher
drive but no head.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2905</TD><TD CLASS='tablecell' VALIGN='top'>Medway pedestal mounted stitcher unit with ticket
dispenser and ticket applicator.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2925</TD><TD CLASS='tablecell' VALIGN='top'>Saxon 5 continuous hot air heat sealer in mild steel
enclosure with adjustable height pedestal and 2500 mm x 200 mm plastic slatted bag conveyor. Built in
2003.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2926</TD><TD CLASS='tablecell' VALIGN='top'>Reed Medway pedestal mounted bag stitcher with Pacepacker
ticket applicator.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3094</TD><TD CLASS='tablecell' VALIGN='top'>Medway 150 stitcher on adjustable pedestal.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3543</TD><TD CLASS='tablecell' VALIGN='top'>Saxon 5 heat sealer on adjustable height stand. Fully
refurbished.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4750<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3596</TD><TD CLASS='tablecell' VALIGN='top'>Thames Packaging hot air continuous heat sealer on
pedestal. This is quite old and is smaller than a Saxon 5. There are quite a lot of spares with this
machine.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3653</TD><TD CLASS='tablecell' VALIGN='top'>Newlong stitcher on adjustable pedestal.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3654</TD><TD CLASS='tablecell' VALIGN='top'>Newlong pedestal mounted stitcher with flat belt bag
conveyor about 2.0 metres long with 250 mm length of fold up gravity roller track at either end.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4044</TD><TD CLASS='tablecell' VALIGN='top'>CETEC FPT 200 pinch top bag closerand sealer purchased
2007. It is suitable for 255 mm x 50 mm x 455 mm high or 280 mm x 100 mm x 550 mm high pre-pasted,
gusseted pinch top bags.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 21000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4122</TD><TD CLASS='tablecell' VALIGN='top'>Medway 150 stitcher head, believed to have been serviced.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
</TABLE><BR><BR>
<A NAME='pelleting'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Pelleting - Pellet Coolers - Box</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3792</TD><TD CLASS='tablecell' VALIGN='top'>Van Aarsen TK1800Z counterflow box cooler built in 1991
with stainless steel sides and top but no inlet rotary valve, fan or cyclone. Throughput believed to be
around 5 - 7 tph on animal feed pellets.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 6500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4093</TD><TD CLASS='tablecell' VALIGN='top'>Geelen pellet cooler fan with 18 kw motor and vee belt
drive. Fan was made by Carter Howden.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 650</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4138</TD><TD CLASS='tablecell' VALIGN='top'>Milltech counterflow box cooler with a capacity up to 10
tph on animal feed pellets. It has support legs, underhopper, level control switches and inlet rotary
valve but no fan or cyclone. The cooler body and top are made from Cromweld steel.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2953</TD><TD CLASS='tablecell' VALIGN='top'>300 mm diameter x 2.0 metre long mild steel conditioner
with drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 950</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3437</TD><TD CLASS='tablecell' VALIGN='top'>Package of spares for a UMT C165 pellet press including
two built up rolls with angled fluting, a cone, a three section die clamp, a part worn die looks like 3.2
mm and an unused refurbished die 3.2 mm x 55.0 mm thick.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4191</TD><TD CLASS='tablecell' VALIGN='top'>Unused die and two unused fluted rolls. The die is 280 mm
diameter with a 50 mm wide track. It is 33 mm thick and has 4.0 mm holes. The die has 10 holes for fixing
bolts. The rolls are 110 mm diameter with 57 mm face width. Possibly for Lister/Templewood or Christy
Pressfeed machines that had horizontal dies.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3045</TD><TD CLASS='tablecell' VALIGN='top'>CPM 7000 pelleting press with base plate 2 speed gearbox,
185 kw drive, external motorised oil pump with filter, stainless steel door, pneumatic dump chute, die
lifting winch, automatic bearing greaser, feeder with variable speed drive, 450 mm diameter x 2.2 metre
long conditioner, die and rollers. The rolls are 250 mm diameter and the die is 572 mm diameter with a 156
mm wide track. The gearbox is in good condition. Thought to be a type 7122-2.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 16500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3790</TD><TD CLASS='tablecell' VALIGN='top'>Simon Barron C125 pelleting press gearbox and base plate
only.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3807</TD><TD CLASS='tablecell' VALIGN='top'>Milltech Compress C95 pellet press on base plate with
90kw direct drive, stainless steel door and four 460 mm diameter dies including one new unused. Track
width 100 mm. The press is not in working order and needs overhauling.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3825</TD><TD CLASS='tablecell' VALIGN='top'>CPM 7000 pellet press with 185kw drive and starter but no
feeder or conditioner. Believed to be a 7122/4. Some damage to motor cover and press door. Includes
spare stainless steel door and cone. Set up for 175 mm track width.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 12500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3856</TD><TD CLASS='tablecell' VALIGN='top'>Sprout Matador PM909XW pelleting press with 250 kw motor
and vee belt drive. The press was built in 1998 and has a stainless steel door and door mounted force
feeder. There is a 600 mm diameter x 3000 mm long stainless steel conditioner with it which has a 20 kw
drive. There is an engineers report available for this machine.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 28000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4098</TD><TD CLASS='tablecell' VALIGN='top'>Swiss Combi 4/4K gearbox and front plate only. This is a
Hansen type 721TS-AN-10 gearbox. It was reconditioned in 1997 but currently needs repair.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4126</TD><TD CLASS='tablecell' VALIGN='top'>Orbit 175 pellet press with base and 75kw drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4137</TD><TD CLASS='tablecell' VALIGN='top'>Paladin 600B pelleting press with 2 x 55 kw motors,
variable speed feeder, stainless steel conditioner, stainless steel door and some spares. It takes 130 mm
track dies. This press has been refurbished but is being offered as seen for a quick sale.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 9500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1530</TD><TD CLASS='tablecell' VALIGN='top'>Turner 6 x 4 pellet screen with plastic top cover. Mono
Plano drive needs to be refitted.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1597</TD><TD CLASS='tablecell' VALIGN='top'>Cryloc single deck rotary pellet sieve 1.4 metres
diameter. Rated at approx 8tph. Four spare screens included.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1672</TD><TD CLASS='tablecell' VALIGN='top'>Single deck horizontal rotary pellet screen with 2.00
metre diameter mesh sieve. Throughput up to 60 tonnes per hour.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3441</TD><TD CLASS='tablecell' VALIGN='top'>Milltech MT25 flat deck rotary pellet sieve with approx.
1.4 metre diameter screen.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3464</TD><TD CLASS='tablecell' VALIGN='top'>Turner 6 x 4 pellet sieve with top cover.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
</TABLE><BR><BR>
<A NAME='pollution_control'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Pollution Control - Carbon Filter</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3421</TD><TD CLASS='tablecell' VALIGN='top'>Purpose made carbon filter 2.0 metres x 3.0 metres x 7.5
metres high with stainless steel walls. There is a fan and some ducting with this machine.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3419</TD><TD CLASS='tablecell' VALIGN='top'>Airsep Corporation model AS12 oxygen generators, single
phase.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3420</TD><TD CLASS='tablecell' VALIGN='top'>Ozomatic type SWO-100 ozone generator built in 2001.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
</TABLE><BR><BR>
<A NAME='roller_mills'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Roller Mills - Flaking</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3509</TD><TD CLASS='tablecell' VALIGN='top'>Damman Croes flaking roller mill with 600 mm x 1300 mm
rolls and two 18.5 kw drives. There is a spare set of rolls included. Was doing about 6 tph on steam
flaking corn. Machine weighs about 10 tonnes. Currently dismantled.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4144</TD><TD CLASS='tablecell' VALIGN='top'>Turner 550 x 750 flaking mill with feed roll and 37kw
drive. This machine is of heavy duty construction to ensure durability and stability and accuracy of roll
gap settings. The mill has the potential for high output but also can produce fine flakes. Typical
applications are cornflakes, wheat flakes, multigrain flakes, oat flakes, rice flakes, mueslies and bread
ingredient flakes. This machine will be fully refurbished to clients specification. Price on application.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> - </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3852</TD><TD CLASS='tablecell' VALIGN='top'>Booth FB 12 roller mill, no motor or tray feeder. Rolls
are 12" wide. Needs to be rebuilt.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4077</TD><TD CLASS='tablecell' VALIGN='top'>Hunt BMH MkIV grain roller mill on a stand with 5.5 kw
drive. The rolls are 200 mm wide and output could be up to 1 tph.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2884</TD><TD CLASS='tablecell' VALIGN='top'>Porteous 36" x 14" dry malt mill with two pairs of rolls
and a screen in between. This roller mill has a feed roll and an 11 kw motor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2885</TD><TD CLASS='tablecell' VALIGN='top'>Steinecher wet malt mill with Huppmann steep box on the
inlet. The mill was built in 1976 and is type 21-2-8281 serial number 291406. This roller mill has a
stainless steel case, two pairs of rolls and two large drive units (could be 22 kw each). There are
stainless steel hoppers above and below the roller mill. These will be for sale if they can be removed
economically.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2933</TD><TD CLASS='tablecell' VALIGN='top'>Pair of unused helical fluted rolls 270 mm diameter with
995 mm face width. The fluting is about 5 mm flat topped. On one side of the rolls there is a 150 mm long
stepped shaft with 60 mm at 80 mm diameter and the rest at 65 mm diameter with a threaded end. On the
other side there is a 285 mm long with 60 mm at 80 mm diameter, 90 mm at 65 mm diameter with a threaded
section, 25 mm at 60 mm diameter and 110 mm at 55 mm diameter with a keyway.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2934</TD><TD CLASS='tablecell' VALIGN='top'>Pair of unused helical fluted rolls 270 mm diameter with
995 mm face width. The fluting is about 7 mm flat topped. On one side of the rolls there is a 150 mm long
stepped shaft with 60 mm at 80 mm diameter and the rest at 65 mm diameter with a threaded end. On the
other side there is a 285 mm long with 60 mm at 80 mm diameter, 90 mm at 65 mm diameter with a threaded
section, 25 mm at 60 mm diameter and 110 mm at 55 mm diameter with a keyway.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2935</TD><TD CLASS='tablecell' VALIGN='top'>Pair of unused helical fluted rolls 240 mm diameter with
1000 mm face width. The fluting is fine, about 10 flutes per inch. On both sides of the rolls there are
290 mm long stepped shafts with 62 mm at 90 mm diameter, a 10 mm long grooved section, a 142 mm long
section 80 mm diameter and the rest at 65 mm diameter.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2936</TD><TD CLASS='tablecell' VALIGN='top'>Pair of unused helical fluted rolls 240 mm diameter with
600 mm face width. The fluting is fine, about 20 flutes per inch. On both sides of the rolls there are 290
mm long stepped shafts with 62 mm at 90 mm diameter, a 10 mm long grooved section, a 142 mm long section
80 mm diameter and the rest at 65 mm diameter.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='rotary_drum_driers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Rotary Drum Driers - Furnace</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3184</TD><TD CLASS='tablecell' VALIGN='top'>James Proctor chain grate furnace for burning coal or
wood fuel.6 years old but done 1 years work only. Output 10 MW thermal. Weighs about 40 tonnes including
refactory lining.<I><b> (1 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2847</TD><TD CLASS='tablecell' VALIGN='top'>Richard Simon Drying Systems drying rolls with 450 mm
diameter x 1370 mm wide rolls, scrapers, tray feeder and 4.0kw geared drive. This machine is for drying
pastes or slurries and requires 80 psi steam for heating the rolls. Machine number is D4414
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2848</TD><TD CLASS='tablecell' VALIGN='top'>Richard Simon Drying Systems drying rolls with 450 mm
diameter x 915 mm wide rolls. This machine is dismantled. This machine is for drying pastes or slurries
and requires steam for heating the rolls.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3614</TD><TD CLASS='tablecell' VALIGN='top'>New mini rotary drying drum with drive, discharge hopper
and rotary valve but no furnace or fan. The drum is 5.1 metres long x 1.25 metres diameter with 7 No
internal baffles. Can be configured to dry a wide range of products.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 18000<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4131</TD><TD CLASS='tablecell' VALIGN='top'>Claas Apollo mobile single pass rotary drum dryer
believed to be mid 1970s vintage. This was working as a high temperature grass dryer but probably did less
than 3000 hours work. The drum is 6.0 metres long and has an outside diameter of 2.0 metres and it is
lagged and clad. The evaporative capacity is 2.6 tph at around 1000 degrees C but it can operate down to
500 degrees C when the evaporative capacity will be lower. The dryer is mounted on a single axle towable
chassis and it has its own diesel power unit driving the hydraulics and electrical equipment. The furnace
is diesel fired. Raw material is fed into the drum from a moving bed trailer with auger discharge that is
parked next to the dryer and connected to the dryer's power source. The dried product is aspirated from
the drum into a stainless steel cyclone with a top mounted fan. The discharge from the cyclone is via a
twin screw discharger. This machine could be adapted to dry other materials such as wood chip and sawdust.
Price includes dryer and feed trailer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4132</TD><TD CLASS='tablecell' VALIGN='top'>Claas Apollo mobile single pass rotary drum dryer
believed to be mid 1970s vintage. This was working as a high temperature grass dryer but probably did no
more than 620 hours work. The drum is 6.0 metres long and has an outside diameter of 2.0 metres and it is
lagged and clad. The evaporative capacity is 2.6 tph at around 1000 degrees C but it can operate down to
500 degrees C when the evaporative capacity will be lower. The dryer is mounted on a single axle towable
chassis and it has its own diesel power unit driving the hydraulics and electrical equipment. The furnace
is diesel fired. Raw material is fed into the drum from a moving bed trailer with auger discharge that is
parked next to the dryer and connected to the dryer's power source. The dried product is aspirated into a
stainless steel cyclone with a top mounted fan. The discharge from the cyclone is via a twin screw
discharger. This machine could be adapted to dry other materials such as wood chip and sawdust. Price
includes dryer and feed trailer but the trailer is in a poor state and may be unusable.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 12500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4175</TD><TD CLASS='tablecell' VALIGN='top'>Single pass rotary drum dryer being used as a cooler for
wood shavings. This drum is 12.16 metres long x 3.05 metres diameter with chain drive, steel tyres and
rollers. The single pass drum has a helical scroll and lifters to make the shavings move down the drum.
The drum is not lagged or clad. There is a 40hp belt driven fan sucking air through the drum. The fan
exhausts into a cyclone via some ductwork. There is no rotary valve on the cyclone outlet. The drum has a
600 mm diameter screw conveyor 3.0 metres long in the end plate for discharging the shavings. The conveyor
has a flared inlet and the drum end has a scroll to drop the shavings into it.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 30000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3695</TD><TD CLASS='tablecell' VALIGN='top'>Swiss Combi MK 10 triple pass rotary drum dryer 1970's
vintage. This was built as a grass dryer but was converted to drying grain in the early 1980's. It is now
a single pass dryer with a 2.2 metre x 7.5 metres long brick lined furnace and a Nu-way CL7-38F diesel
fired burner rated at 2.9 MW thermal. The drum is about 3.6 metres diameter x 11.0 metres long and is
lagged and clad. The drum drive was changed from friction drive to chain drive. There is an expansion
chamber on the drum outlet where the dried grain drops out and the hot air passes to the original 3.4
metre diameter x 8.4 metre high cyclone with an 800 mm diameter rotary valve. The main fan is a
Stockbridge Airco CBLM 900 and has a 45 kw belt drive. The fan will deliver up to 26,000 cfm at 9.5" WG.
This fan is smaller than the original. Starters and controls are included. It is believed that this dryer
has an output of up to 20 tph of uncooled dry grain and that it could be used to dry wood chips or wood
shavings without too much modification.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4084</TD><TD CLASS='tablecell' VALIGN='top'>5 tph evaporative capacity triple pass rotary drum dryer.
This is a copy of a Swiss Combi dryer and the capacity is rated at 1000 degrees centigrade. It has a
refractory lined furnace with a 20,000,000 BTU Hamworty heavy oil burner and in-line oil heater. It also
has a Hamworthy SO 4 light oil burner. The dryer is currently drying wood shavings. There is some lagging
and cladding missing from the inlet end of the drum. The 55kw fan and some ducting will be included but
not the cyclone and rotary valve.Drum and furnace will be available August 2010.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 30000</TD></TR>
</TABLE><BR><BR>
<A NAME='rotary_valves'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Rotary Valves - Blowing Seals</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2824</TD><TD CLASS='tablecell' VALIGN='top'>MID 200 mm diameter drop through rotary valve with 200 mm
diameter inlet. This has been converted to suit 75 mm blowline.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2825</TD><TD CLASS='tablecell' VALIGN='top'>250 mm diameter blowing seal to suit 80 mm blowline.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2835</TD><TD CLASS='tablecell' VALIGN='top'>200 mm diameter blowing seal for 75 mm blowline. The
inlet is 200 mm diameter.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2837</TD><TD CLASS='tablecell' VALIGN='top'>Derion GS200 blowing seal with 200 mm diameter inlet. To
suit 80 mm blowline.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2836</TD><TD CLASS='tablecell' VALIGN='top'>Derion AL250 drop through rotary valve with 250 mm
diameter inlet. This has been converted for use with a 100 mm diameter blowline.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2864</TD><TD CLASS='tablecell' VALIGN='top'>Derion MD150 drop through rotary valve with 150 mm
diameter inlet and 150 mm x 150 mm outlet.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2877</TD><TD CLASS='tablecell' VALIGN='top'>Derion AMD 250 drop through rotary valve.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 300</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2879</TD><TD CLASS='tablecell' VALIGN='top'>Rotolok 400RV drop through rotary valve.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2903</TD><TD CLASS='tablecell' VALIGN='top'>150 mm diameter drop through rotary valve with 150 mm
diameter inlet and outlet and Neco right angle drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3456</TD><TD CLASS='tablecell' VALIGN='top'>Robinson 300 mm diameter rotary valve 400 mm deep with
300 x 176 mm inlet. This is a drop through valve with an underhopper conversion to make it a blowing
seal.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3845</TD><TD CLASS='tablecell' VALIGN='top'>Rubber tipped drop through rotary valve with drive. Inlet
and outlet 520 mm x 220 mm and rotor is about 300 mm diameter.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3847</TD><TD CLASS='tablecell' VALIGN='top'>Drop through rotary valve model SNM size 12 x 12.
Probably Westinghouse Derion. This rotary valve is 400 mm high and has no drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4095</TD><TD CLASS='tablecell' VALIGN='top'>Swiss Combi 350 mm diameter drop through rotary valve
with 350 mm x 200 mm inlet but no drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
</TABLE><BR><BR>
<A NAME='shavings_production_machines'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Shavings Production Machines - Shavings Planing
Machines</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4169</TD><TD CLASS='tablecell' VALIGN='top'>Salsco single head log planer with 2.5 metre long log
box, 55 kw cutter drive and 7.5 kw hydraulic drive. Machine built 2007.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7500<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='sieves,_screens_and_sifters'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Sieves, Screens & Sifters - Brush Sifters</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2817</TD><TD CLASS='tablecell' VALIGN='top'>Mullner and Lux brush sifter with 170 mm diameter x 400
mm long fabric basket.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2818</TD><TD CLASS='tablecell' VALIGN='top'>Brush sifter with 300 mm diameter x 750 mm long basket.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2859</TD><TD CLASS='tablecell' VALIGN='top'>Robinson brush sifter with 250 mm diameter x 1000 mm long
basket.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2899</TD><TD CLASS='tablecell' VALIGN='top'>KEK brush sifter type KEK 68859MAJM06604 built in 1990.
Basket size about 260 mm diameter x 600 mm long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2900</TD><TD CLASS='tablecell' VALIGN='top'>Le Coq 530 brush sifter, no shaft, no motor.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2901</TD><TD CLASS='tablecell' VALIGN='top'>Stainless steel cased brush sifter, basket size about 200
mm diameter x 600 mm long. This is an old machine.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3455</TD><TD CLASS='tablecell' VALIGN='top'>Simon Barron Le Coq 560 rotary brush sifter with 305 mm
diameter inlet screw, 400 mm diameter x 1250 mm long sieve barrel and drive unit.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3980</TD><TD CLASS='tablecell' VALIGN='top'>Simon Barron brush sifter possibly a 560 Le Coq. It has a
motor that looks to be about 15kw and a tapered basket 490 mm diameter x 1250 mm long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3981</TD><TD CLASS='tablecell' VALIGN='top'>Brush sifter possibly a Simon Solitec Siscan. It has a
motor that looks to be about 15kw and a parallel basket 400 mm diameter x 1250 mm long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2520</TD><TD CLASS='tablecell' VALIGN='top'>Scalper 45D inclined two deck screening machine with
diesel power unit. Each deck is about 1.5 metres wide x 1.2 metres long. There is a selection of spare
screens.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 6000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3478</TD><TD CLASS='tablecell' VALIGN='top'>Mogensen 1054 sieve. This a five deck machine 1.0 metres
wide and the decks can be heated.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3479</TD><TD CLASS='tablecell' VALIGN='top'>Mogensen DESIO 168E sieve. This a five deck machine 500
mm wide.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 3500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3519</TD><TD CLASS='tablecell' VALIGN='top'>Turner 6 x 4 general purpose sieve.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3786</TD><TD CLASS='tablecell' VALIGN='top'>Turner 6 x 4 screen with drive. This machine needs some
work on the mono-plano drive support frame.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3816</TD><TD CLASS='tablecell' VALIGN='top'>Mogensen EDRSL inclined two deck screen 900 mm wide X
1200 mm long with a 20 mm top screen and a 2.0 mm bottom screen. This machine is in need of major repair
and the work has been quoted by Mogensen at œ1500.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3975</TD><TD CLASS='tablecell' VALIGN='top'>Wobble box for Turner inclined deck reciprocating sieve.
MAX type.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3108</TD><TD CLASS='tablecell' VALIGN='top'>Locker Rotex 43GP screen, 84" x 40" 3 deck. No screens or
screen frames.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3110</TD><TD CLASS='tablecell' VALIGN='top'>Locker Rotex series 80 gearbox.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2775</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3111</TD><TD CLASS='tablecell' VALIGN='top'>Locker Rotex series 40 gearbox.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1950</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3112</TD><TD CLASS='tablecell' VALIGN='top'>Gough 24" circular two deck sieve.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1550</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3417</TD><TD CLASS='tablecell' VALIGN='top'>Locker Rotex sieve on support frame. About 1.0 metre wide
x 1.5 metres long deck. Believed to be a type 22GP.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3508</TD><TD CLASS='tablecell' VALIGN='top'>Russell Finex 22 flat deck circular single deck screen.
This screen is 1990-91 vintage, 600 mm diameter and has stainless steel contact parts. Fitted with a deck
scroll.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4202</TD><TD CLASS='tablecell' VALIGN='top'>Locker Rotex model 42A with meshes as fitted. Fully
reconditioned.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 6850</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2841</TD><TD CLASS='tablecell' VALIGN='top'>Golfetto plansifter 1.5 metres x 1.1 metres x 1.0 metre
high. No suspension unit or drive.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2846</TD><TD CLASS='tablecell' VALIGN='top'>Simon 2N double plansifter with 3 No sifter boxes and a
large selection of screen clothes. Boxes are 660 mm x 660 mm x 610 mm high. Approx 1 tph per side.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
</TABLE><BR><BR>
<A NAME='steam_and_hot_water_plant'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Steam & Hot Water Plant - Steam & Hot Water Plant</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3428</TD><TD CLASS='tablecell' VALIGN='top'>Cradley Steampacket steam raiser type MAB 25 built in
1980. It will deliver 2500 lbs of steam per hour at 110 psi. There is a water treatment plant with it. The
burner is diesel fired.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
</TABLE><BR><BR>
<A NAME='storage'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Storage - Grain Walling</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3880</TD><TD CLASS='tablecell' VALIGN='top'>Short galvanised channel section to fit between grain
wall supporting stanchions. 152 mm x 76 mm RSC 1.34 metres long.<I><b> (50 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 20<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3881</TD><TD CLASS='tablecell' VALIGN='top'>Galvanised steelwork for supporting inclined retaining
walls for air tunnel. The steel is 254 mm x 146 mm UB about 4.5 metres high with angled ends. Total weight
about 140 kg. Can be altered for simpler application.<I><b> (200 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 95<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4078</TD><TD CLASS='tablecell' VALIGN='top'>Crittall pattern galvanised silo panel nominal 9' and 10'
long with about 40" cover.<I><b> (60 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 30<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1669</TD><TD CLASS='tablecell' VALIGN='top'>Intake receiving hopper 3.00 metres wide x 1.60 metres
deep x 1.70 metres high with safety grid. This hopper was used for receiving bulk pellets from a loading
shovel. This hopper is part of a complete bulk pellet screening, coating and loading plant.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3877</TD><TD CLASS='tablecell' VALIGN='top'>Enclosed steel hopper with screw discharger and level
switch. The hopper is 1.8 metres x 1.8 metres x 3.25 metres high with sloping sides and a 180 mm diameter
full width screw discharger. Working volume is about 5 cubic metres.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4080</TD><TD CLASS='tablecell' VALIGN='top'>Open topped storage hopper in painted steel with 250 mm
diameter screw discharger on the outlet. The discharger has had the outlet end cut of and needs repair.
The hopper is 2.4 x 2.4 x 3.9 metres high with 1.9 metres of vertical wall and a 900 mm long chisel
outlet. It has support brackets but no legs and the level full volume is about 15 cubic metres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4099</TD><TD CLASS='tablecell' VALIGN='top'>Galvanised smooth walled circular hopper with top cover
and large rotary valve on the outlet. The hopper has painted steel legs and bracing and is suitable for
poor flowing products. The hopper is 2.44 metres diameter x 6.89 metres high with 2.44 metres of vertical
wall. There is a 600 mm diameter x 1000 mm wide rubber tipped rotary valve on the hopper with a transition
terminating in a 400 mm diameter outlet 1.25 metres above base level. The hopper has a level full volume
of approx 15 cubic metres.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1750</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4116</TD><TD CLASS='tablecell' VALIGN='top'>Rowlands outloading hopper with a nominal capacity of 29
tonnes. This is a galvanised, corrugated round silo on supprting steelwork.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 7500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3704</TD><TD CLASS='tablecell' VALIGN='top'>Circular open topped hopper bottomed silo made from flat
panels with bolted joints. The silo is 4.8 metres diameter x 3.6 metres high with a 45 degree internal
conical hopper. About 35 cubic metres level full volume. This silo is dismantled.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3893</TD><TD CLASS='tablecell' VALIGN='top'>850 tonne grain silo + 750 tonne grain silo + 12 No 300
tonne grain silos with associated handling equipment. Still in situ, buyer removes.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> - </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4040</TD><TD CLASS='tablecell' VALIGN='top'>Block of 20 No Crittall style galvanised open topped
square silos on supporting steelwork with hopper bottoms. Nominal capacity 50 tonnes of grain per silo. In
a 2 x 10 block approx dimensions 6.0 x 30.0 x 10.0 metres high. Already dismantled.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 25000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4133</TD><TD CLASS='tablecell' VALIGN='top'>Brice Baker open topped, flat bottomed galvanised,
corrugated, round steel silo 18'-0" diameter x 16'-6" high with access door and auger discharge tube.
Nominal level full capacity 90 tonnes of dry wheat. Will be dismantled. 6" silo unloading auger available
at extra cost.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 800<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2762</TD><TD CLASS='tablecell' VALIGN='top'>Tote bin support stand with electro pneumatic outlet
slide.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 75</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3895</TD><TD CLASS='tablecell' VALIGN='top'>Mild steel tote bins with centre discharge. Nominal 1
tonne capacity. 1.25 x 1.25 x 1.8 high including 0.9 vertical wall. These are not pretty but are
usable.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 80<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3908</TD><TD CLASS='tablecell' VALIGN='top'>Tote bin support frames 1.4 metres x 1.4 metres x 2.0
metres high with small receiving hopper.<I><b> (4 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50<I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='timber_extraction_and_processing'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Timber Extraction & Processing - Debarker</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4149</TD><TD CLASS='tablecell' VALIGN='top'>Valon Kone VK26M debarking machine built in 1979. This
machine has inlet and exit tables and will handle up to 2300 mm long x 610 mm diameter logs. It has 2 x
15kw drives and a work rate of 17 - 42 metres per min.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4152</TD><TD CLASS='tablecell' VALIGN='top'>Geith heavy duty log grapple with 2 over 3 tines.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3644</TD><TD CLASS='tablecell' VALIGN='top'>Rexworks Maxigrind type 425 horizontal grinder built in
1995. This is a chassis mounted unit with receiving hopper, 1.5 metre wide hydraulic discharge belt,
diesel power unit and all controls.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 17500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4158</TD><TD CLASS='tablecell' VALIGN='top'>Dymax Timberwolf 20" tree shear with accumulator for
mounting on an excavator or suitable wheeled loader. This will cut through timber up to 20" in diameter
and requires a hydraulic supply of 25 gpm minimum at up to 3500 psi. This unit is 2.3 metres high and
weighs 2.8 tonnes. It has been used for demonstration purposes only.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 20000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4159</TD><TD CLASS='tablecell' VALIGN='top'>Dymax Timberwolf 14" tree shear with accumulator for
mounting on a skid steer digger or suitable wheeled machine. This will cut through timber up to 14" in
diameter and requires a hydraulic supply of 15 gpm minimum at up to 3200 psi. This unit is 1.7 metres high
and weighs 1.0 tonne. It requires a control module. This machine is unused.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 15000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4148</TD><TD CLASS='tablecell' VALIGN='top'>Junkkari HJ500 mobile wood chipper built 2006. This
machine will accept up to 450 mm diameter logs and entry is at 45 degrees to the cutting disk. It has
remote electro hydraulic controls. Chipping rates of up to 100 cubic metres per hour can be expected and
PTO power from 110 - 200 hp is required.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 19500</TD></TR>
</TABLE><BR><BR>
<A NAME='valves'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Valves - Diverter</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2556</TD><TD CLASS='tablecell' VALIGN='top'>Rotolok type 100SCDPCMP553T electro pneumatic blowline
diverter valve for 100 mm blowline. These are flap type not plug type valves.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 400<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2776</TD><TD CLASS='tablecell' VALIGN='top'>Manual branch type diverter valve with flanged 150 mm x
150 mm inlet and outlets.<I><b> (4 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2777</TD><TD CLASS='tablecell' VALIGN='top'>Electro pneumatic branch type diverter valve with flanged
200 mm x 200 mm inlet and outlets.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 75<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2778</TD><TD CLASS='tablecell' VALIGN='top'>Manual branch type diverter valve with flanged 200 mm
diameter inlet and outlets.<I><b> (3 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 60<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2779</TD><TD CLASS='tablecell' VALIGN='top'>Electro pneumatic branch type diverter valve with flanged
350 mm x 350 mm inlet and outlets.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 90</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2782</TD><TD CLASS='tablecell' VALIGN='top'>Manual Y type diverter valve with flanged 200 mm diameter
inlet and outlets.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 60</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2886</TD><TD CLASS='tablecell' VALIGN='top'>140 mm diameter alloy blowline diverter valve with
electro pneumatic actuator.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 50<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3839</TD><TD CLASS='tablecell' VALIGN='top'>200 mm diameter Y diverter valve with swaged ends for
clipped joints. This is a pneumatic valve with a Kinetrol actuator.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4072</TD><TD CLASS='tablecell' VALIGN='top'>A selection of Carier diverters, branches, square to
round adaptors and elevator and conveyor fittings all paint finish. Some 6" some 8".<I><b> (15
available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'> T.B.A. <I> ( Each) </i> </TD></TR>
</TABLE><BR><BR>
<A NAME='weighers'>
<TABLE WIDTH='100%' ALIGN='center' CLASS='mactypetable'>
<TR><TD COLSPAN='3' CLASS='mactypeheader'>Weighers - Bag Weigher</TD></TR>
<TR><TD WIDTH='15%' CLASS='tableheader'>Item Ref</TD><TD ' CLASS='tableheader'
WIDTH=70%'>Description</TD><TD ' CLASS='tableheader' WIDTH='15%' ALIGN='right' >Price</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1083</TD><TD CLASS='tablecell' VALIGN='top'>Howe Richardson EE50 mechanical, automatic net bag
weigher, built 1979, with gravity feed and electro-pneumatic bag clamp.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1534</TD><TD CLASS='tablecell' VALIGN='top'>Chronos Richardson EE 50 automatic nett bag weigher with
wide two speed belt feederand control panel but no scale pan, under hopper or bag clamp. Built 1983.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1686</TD><TD CLASS='tablecell' VALIGN='top'>Howe Richardson H17 semi automatic gross bag weigher
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1200</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2092</TD><TD CLASS='tablecell' VALIGN='top'>Windmoller and Holscher Diamant 420 tubular bagging
machine, up to 1200 bags per hour.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 35000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2096</TD><TD CLASS='tablecell' VALIGN='top'>A pair of Libra gravity fed net bag weighes, up to 700
bags per hour at 25kg. Built 1990 serial number 903401. Two weighers have one Libratronik control panel.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2794</TD><TD CLASS='tablecell' VALIGN='top'>Bag holder with overcentre clamp and 305 mm x 230 mm
eliptical tube.<I><b> (2 available)</b></I>
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100<I> ( Each) </i> </TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2795</TD><TD CLASS='tablecell' VALIGN='top'>Howe Richardson G30 bag clamp 280 mm x 203 mm.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 150</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2796</TD><TD CLASS='tablecell' VALIGN='top'>Howe Richardson bag posser with bag clamp.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2889</TD><TD CLASS='tablecell' VALIGN='top'>Richard Simon belt feeder for bag weigher. The feeder is
1.32 metres long x 480 mm wide with a 385 mm wide belt and a 300 mm wide inlet. Serial number 14581.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2922</TD><TD CLASS='tablecell' VALIGN='top'>Weitek WFM 1200 tubular bagging machine built in 2001.
Will do up to 1200 bags per hour using plastic tubular film.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 45000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3424</TD><TD CLASS='tablecell' VALIGN='top'>Howe Richardson EE50 mechanical automatic bag weigher
with wide belt feeder, stainless steel underhopper, electro pneumatic bag clamp and control panel.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3912</TD><TD CLASS='tablecell' VALIGN='top'>Bag holder with overcentre clamp and 250 mm x 178 mm
eliptical tube.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4167</TD><TD CLASS='tablecell' VALIGN='top'>Chronos gravity fed automatic net bag weigher built in
1999. This is an electronic weigher believed to be an E55. It weighs from 5 - 15kg in 0.02kg divisions and
has Speedac 7 controls. The weigher comes with a support platform, underhopper and bag clamp.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4168</TD><TD CLASS='tablecell' VALIGN='top'>Chronos gravity fed automatic net bag weigher with
underhopper and bag clamp. This is an electronic weigher with Speedac 7 controls but it may be a
mechanical unit converted to electronic.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3878</TD><TD CLASS='tablecell' VALIGN='top'>Enclosed steel hopper with screw discharger. The hopper
is 1.2 metres x 1.2 metres x 2.3 metres high with sloping sides and a 180 mm diameter full width screw
discharger. Working volume is about 2 cubic metres. This sits on a 1000kg mechanical platform scale so
that the contents can be weighed.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3545</TD><TD CLASS='tablecell' VALIGN='top'>Garvens model ECO 100 S belt type continuous check
weigher in stainless steel. This machine was built in 1999 and has done little work. It will check items
up to 50kg.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 4000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2888</TD><TD CLASS='tablecell' VALIGN='top'>Chronos in-line continuous tube weigher with single load
cell and electro pneumatically actuated flap valve. It looks as if it had been working in a blowline. The
weighing tube has a volume of about 12.5 litres. There are no controls with it. The unit has overall
dimensions of 500 mm wide x 1100 mm long.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2890</TD><TD CLASS='tablecell' VALIGN='top'>Chronos in-line flour weigher No 93 136L 0100 with PC456
control box. This unit is about 900 mm diameter x 2200 mm high.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2500</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2891</TD><TD CLASS='tablecell' VALIGN='top'>Chronos in-line flour weigher No 93 136L 0200. This unit
is about 900 mm diameter x 2200 mm high. No control box.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 2000</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-1637</TD><TD CLASS='tablecell' VALIGN='top'>Pro-Weigh 2000 electronic platform scale with 1.3 metre x
1.55 metre platform and controls. This unit is not stamped. The platform has an electro pneumatic bag
clamp and support frame attached to it and the weight controls will operate the screw feeder. This makes
up a semi automatic 25 kg bag weigher. Part of a complete 3-4 x 25 kg bag per minute packing line.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 800</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-2259</TD><TD CLASS='tablecell' VALIGN='top'>Tanita model 1144 electronic battery operated platform
scale with 180 mm x 180 mm stainless steel platform. To weigh 0 - 1000 gms in 1 gm divisions.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 40</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3330</TD><TD CLASS='tablecell' VALIGN='top'>Electronic platform scale to weigh up to 2.0 tonne. The
platform is 1.55 x 1.55 metres and can be moved with a fork truck. The controls are independantly mounted
on a moveable stand. The weigher is not stamped.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 1250</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3410</TD><TD CLASS='tablecell' VALIGN='top'>Avery dial head type mechanical platform scale 0 -1000
kg.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 350</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-4004</TD><TD CLASS='tablecell' VALIGN='top'>Mettler ID2 electronic platform scale for additives
weighing.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 100</TD></TR>
<TR><TD VALIGN='top' CLASS='tablecell-lead'>
UCPE-3802</TD><TD CLASS='tablecell' VALIGN='top'>15 metre x 3 metre x 50 tonne weighbridge built by
Scales, Spares & Services. It sits in pit 350 mm below the deck but could be surface mounted with ramps.
Digital readout by First Weigh but no printer.
</TD><TD VALIGN='top'' ALIGN='right' CLASS='tablecell-price'>£ 5000</TD></TR>
</TABLE><BR><BR>
<DIV CLASS='footnote'> Last updated 02/09/2010 23:34:22</DIV>
</BODY>
]]>