USED EQUIPMENT WANTED

I have clients seeking the following items of used equipment :-

1. 24 X 24 counterflow pellet cooler
2. Gravity separating tables, any size considered
3. Carier 12ST belt and bucket elevators, any height and any bucket spacing.
4. Carier 9ST belt and bucket elevators, any height and any bucket spacing
5. Carier 9HO belt and bucket elevators, any height and any bucket spacing.
6. Modern palletising machines, robots preferred.
7. Air flotation destoners, any size considered
8. Airmaster or DCE reversejet filters up to 100 square metres filter area.
9. Airmaster or DCE shaker type dust collectors with dust buckets.
10. Carier 300 mm wide belt conveyors (modern type), any length.
11. Pellet cooler, counterflow box type, any size.
12. Chevron belt conveyors any size.
13. Hopper bottomed tote bins in steel or polyethylene, up to 1.25 cu. metres capacity.
14. Complete straw chopping and dedusting plant, around 3 tph.
15. Modern belt conveyors, any size.
16. Rotary grain cleaners, any size.
17. Micronising plant with flaking rolls and cooler up to 2 tph
18. Christy X15 hammer mill
19. Continuous flow grain dryers 25 - 30 tph for outdoor erection.
20. Block of 10 No nominal 10 tonne capacity blending bins with screw dischargers and bulk weigher.
21. Large pellet presses 160kw plus
22. Buhler machines for flour or feed milling
23. Sortex colour sorters
24. Pellet crumbler
25. Balepak 120 or similar automatic baler.
26. Large roller mill
27. Saxon 5 and Saxon 10 heat sealers
28. Gussett reformer for open mouthed bags
29. Amandus Kahl pellet presses size 1000 and above.
30. CPM 7700 or 7900 pellet presses
31. Christy 30 x 30 or 40 x 30 pulveriser.
32. Circular smooth wall unit construction silos with hopper bottoms, 30 - 40 cubic metres capacity. Must be transportable as a unit. Up to 10 required
33. Automatic pallet wrappers up to 2.0 metre diameter
34. Pallet roller conveyor, heavy duty, any length, gravity or powered 1300 mm and 1600 mm wide.
35. Verville VP400 four station vertical carousel baler with bag placer and heat sealer suitable for wood shavings.
36. Rotary drum dryers with or without furnaces. Swiss Combi, Vandenbroek or Atlas preferred but others considered
37. Buhler MDDB roller mill for flour.
38. Christy X26 hammermill
39. Crittall or Simplex rectangular grain storage silos
40. Strahle SK130/3 oil extraction screw press with 7.5 kw drive
41. Weighbridge 18 metre x 3 metre x 50 tonne surface mounted.
42. Tub grinder to do 3 tph on dry straw down to 25 mm
43. 120 tph grain thrower. Redler type as used in Intervention Stores
44. 60 tph grain dryer
45. 4.0 M high grain walling steel or concrete
46. 100 tph grain intake system
47. 100 tph belt conveyors for dry grain 1 x 80 M, 1 x 75 M, 1 x 50 M
48. Flat bed dryer for shavings, wood chip etc
49. Mobile milling and mixing unit onplated lorry chassis. Should be capable of ingredient weighing, hammermilling, roller milling, mixing, molassing and discharging into bigs. At least 5 tph output required.

Notes

1. Any used equipment offered must be complete and in working order or any faults highlighted prior to purchase.
2. Prices quoted should carry a 10% commission for UCPE.